topic Re: Interior Elevation Tag in Dynamic Blocks Forum

Interior Elevation Tag

Anonymous — Mon, 08 Jun 2015 22:05:36 GMT

Here we go again . . .

I have attached the interior elevation tag we use in our office. What I am trying to achieve is the ability to have the solid poche be on/off for each "arrow" independently. I would like to be able to have full control over the on/off state though where I can have any combination of the arrows on/off at the same time.

Also, looking to Libbya here, how would I add the same scale via LookUp ala the north arrow tag you helped me with last week.

Thanks again!!!

Re: Interior Elevation Tag

Libbya — Tue, 09 Jun 2015 02:57:27 GMT

I don't have time to explain more now and will be away for a bit.

The scale is the same solution as before.

For the multi-visibility I used the solution I posted in this thread: http://forums.autodesk.com/t5/dynamic-blocks/ootb-multiple-visibility-states-solution/m-p/4961288#M16561

I would prefer the function of the second block where I used Flip parameters as inputs as you just have to click the grip.

Re: Interior Elevation Tag

Anonymous — Fri, 12 Jun 2015 13:59:17 GMT

Lbbya,

Thank you again. I am learning alot from your expertise in AutoCad! I have applied what you did for the Elevation Tag to a Partition Type tag we used. The tag works beautifully, but I cannot get rid of the "custom" field in the LookUp. Obivously my eyes are looking over something that is triggering this. When you have a free moment ( I say that with a chuckle because your free moments appear to be on this board helping all of us) can you have a quick look at this block? Hopefully you will see what I have overlooked.

Thanks!

Re: Interior Elevation Tag

ojuris — Fri, 12 Jun 2015 15:17:40 GMT

You had empty lookup table "Lookup5" for Lookup1 parameter

Regards

Juris

Re: Interior Elevation Tag

Anonymous — Fri, 12 Jun 2015 15:22:19 GMT

Thank you. I need to start working on these blocks using BACTIONBARMODE = 0. I would have caught that then and I didn't even think to check!

Dynamic Numbering tagging

Anonymous — Tue, 01 Mar 2016 14:41:59 GMT

Hi,

Dear I need a Dynamic Tag for numbering

in project drawings all time we need to make tag for equipments or pipes ....items reference point on site ext..

i need dynamic tag help us as per attached autocad drawing

Re: Interior Elevation Tag

jrr — Wed, 30 May 2018 12:55:19 GMT

Hi Libbya,

Do you have a tag like this that would be for only one interior elevation but can use four different visibility views?

Thanks.

Re: Interior Elevation Tag

Libbya — Wed, 30 May 2018 14:55:22 GMT

I'm not sure what you are asking for. If you want only one arrow, there is no need for visibility states. Just add a rotate to the arrow to allow it to point whichever direction you like.

Re: Interior Elevation Tag

Anonymous — Tue, 11 Dec 2018 15:24:56 GMT

How do you change the hatch color from pink?

Re: Interior Elevation Tag

Libbya — Tue, 11 Dec 2018 15:55:10 GMT

As stated above, it uses different visibility states and uses different lookups or the flip parameters as inputs to a double lookup to do the switching.