topic Re: Weird problem with Dynamic Block grips. in Dynamic Blocks Forum

Weird problem with Dynamic Block grips.

mloszakiewiczYCWJX — Mon, 01 Jul 2024 14:33:31 GMT

Hi there. I have a problem with dynamic blocks. The existing blocks inserted into drawings work fine, display grips and so on. When I create a new dynamic block, it does not display dynamic grips at all. Also, if I add parameters or actions to the existing blocks, the added functions do not appear in the block while the existing functions are not affected.

Re: Weird problem with Dynamic Block grips.

h_s_walker — Mon, 01 Jul 2024 15:01:26 GMT

Post an affected block

Re: Weird problem with Dynamic Block grips.

mloszakiewiczYCWJX — Mon, 01 Jul 2024 15:17:37 GMT

Thanks for reply. For comparison: EstStairs300.dwg is unaffected, EstStairs300-1.dwg has an additional parameter and action that is affected, Random Block.dwg does not work at all (doesn't show any Dynamic Block grips).

Re: Weird problem with Dynamic Block grips.

h_s_walker — Mon, 01 Jul 2024 16:05:28 GMT

@mloszakiewiczYCWJX See the image below. The text is the same for your Random block as well, both distance parameters have the same exclamation mark. The problem is you have used the basepoint of the distance parameter as your start for the stretch. Delete the stretch action and this time use the actual point that you're going to stretch.

Re: Weird problem with Dynamic Block grips.

mloszakiewiczYCWJX — Mon, 01 Jul 2024 16:29:50 GMT

It worked. Thanks.