https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666685#M16131 <P>I have annotatively scaled Fire Alarm icon block (drawn at 1:1) that I would like to add a circle to it representing the maximum coverage of the device but have that circle always appear at a constant diameter of say 60'-0" no matter what the annotative scale of the block is.&nbsp; I want the icon in the block to appear bigger when inserted into a drawing scale of say 1/8" = 1'-0" but have the coverage circle stay at a constant 60'-0" diameter. Any suggestions? Attached is my block.&nbsp;</P> Mon, 18 Mar 2019 18:26:12 GMT Anonymous 2019-03-18T18:26:12Z https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666685#M16131 <P>I have annotatively scaled Fire Alarm icon block (drawn at 1:1) that I would like to add a circle to it representing the maximum coverage of the device but have that circle always appear at a constant diameter of say 60'-0" no matter what the annotative scale of the block is.&nbsp; I want the icon in the block to appear bigger when inserted into a drawing scale of say 1/8" = 1'-0" but have the coverage circle stay at a constant 60'-0" diameter. Any suggestions? Attached is my block.&nbsp;</P> Mon, 18 Mar 2019 18:26:12 GMT https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666685#M16131 Anonymous 2019-03-18T18:26:12Z https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666870#M16132 <P>Make the block non-annotative.&nbsp; Make the symbol a nested annotative block.&nbsp; Make the attribute annotative.&nbsp; The nested block will scale from its basepoint.&nbsp; The attribute will scale from its justification point.&nbsp; The added circle of a specific diameter will not scale with annotative scale changes.&nbsp;&nbsp;</P> Mon, 18 Mar 2019 19:43:51 GMT https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666870#M16132 Libbya 2019-03-18T19:43:51Z https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666880#M16133 <P>Thank you I will try it out</P> Mon, 18 Mar 2019 19:47:19 GMT https://forums.autodesk.com/t5/dynamic-blocks-forum/annotative-block-with-a-circle-at-a-constant-diameter/m-p/8666880#M16133 Anonymous 2019-03-18T19:47:19Z