https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503909#M96098 <P>one other thing to add. in the same file I was playing with the 2d isometric drafting.</P> Sat, 09 May 2020 15:58:15 GMT Anonymous 2020-05-09T15:58:15Z https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503899#M96097 <P>ok I have been playing with the 3d modeling work space and some of the solids that can be used.&nbsp; I have been placing these items into a tin surface that is using a visual style.</P><P>In the process I have lost the ability to hove over the surface to obtain an approximate elevation of the ground</P><P>surface. I am trying to do this through the civil 3d workspace. I also have also switched the visual style to 2d wireframe.</P><P>&nbsp;</P><P>I am guessing that I have somehow turned something off.</P> Sat, 09 May 2020 15:50:17 GMT https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503899#M96097 Anonymous 2020-05-09T15:50:17Z https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503909#M96098 <P>one other thing to add. in the same file I was playing with the 2d isometric drafting.</P> Sat, 09 May 2020 15:58:15 GMT https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503909#M96098 Anonymous 2020-05-09T15:58:15Z https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503998#M96099 <P>got it. Roll over tool tips was turn off.</P> Sat, 09 May 2020 16:48:26 GMT https://forums.autodesk.com/t5/civil-3d-forum/tin-surface-minor-problem/m-p/9503998#M96099 Anonymous 2020-05-09T16:48:26Z