topic Re: Create distance to point in Civil 3D Forum

Create distance to point

Anonymous — Thu, 28 May 2020 09:44:20 GMT

Dear sir /Madam

Ih problems when subassembly composer create distance to point .

Thanks you

Best regards

Re: Create distance to point

tcorey — Thu, 28 May 2020 15:47:49 GMT

Can you give more details? Post your .pkt file?

Re: Create distance to point

Anonymous — Sat, 30 May 2020 15:42:10 GMT

Dear sir.

this is file Pkt file and dwg typicall CS

Re: Create distance to point

Anonymous — Sat, 30 May 2020 15:47:09 GMT

Dear sir

why i can't attach PKT file

Re: Create distance to point

M_Obradovic — Sat, 30 May 2020 16:11:37 GMT

You can't attach PKT file but you have to change extension of PKT to ZIP. Or just to zip file and than you will be able to attact to forum.

Re: Create distance to point

Anonymous — Sun, 31 May 2020 00:44:26 GMT

thank you for your advice

this is my PKT file

Re: Create distance to point

tcorey — Sun, 31 May 2020 02:58:41 GMT

I have your pkt file. Can you post a screenshot where in the flowchart you are having the problem?

Re: Create distance to point

Anonymous — Sun, 31 May 2020 03:31:30 GMT

Dear sir

that is the problem when i try to create line between P14 and P13 it not happen.

Re: Create distance to point

tcorey — Tue, 02 Jun 2020 13:24:30 GMT

You have the Cut and Fill backwards in that first decision. You are using AP2.y>P11.y as your condition, but then saying False = Cut. AP2 is being placed on the surface, so that being higher than the test point, P11, would mean Cut should be assigned to True and Fill to False.