topic Re: Pipe Networks - 84-inch Structure in Civil 3D Forum

Pipe Networks - 84-inch Structure

Anonymous — Sat, 29 Aug 2020 01:21:44 GMT

Hello, I'm working with a pipe network that I began in Civ3D 2016 and have upgraded to 2018 and now 2020. The network has 84-inch Concentric Cylindrical structures which were created in 2016. I'm currently working in 2020 and trying to add a new 84-inch structure, but can't find it in my Full Parts list. Does this internal diameter no longer exist? If not, is it possible to create a new structure and add it to the parts list? When I go in to modify the existing structure properties, the drop down doesn't give an option for an 84-inch internal diameter. Any thoughts/suggestions?

Thanks,

Re: Pipe Networks - 84-inch Structure

wfberry — Sat, 29 Aug 2020 12:43:39 GMT

For starters, open up a current blank 2020 drawing made from your template. See if the sizes are available.

Bill

Re: Pipe Networks - 84-inch Structure

Joe-Bouza — Sat, 29 Aug 2020 17:40:01 GMT

If the part was created in a different catalog it would not show. Perhaps your catalogs for the previous version and the new version are different

Re: Pipe Networks - 84-inch Structure

Anonymous — Mon, 31 Aug 2020 16:10:02 GMT

Bill,

Thanks for the reply. I created a new drawing and Full Catalog, with no success. After talking to a few of the designers in my company, it seems to have been a custom part that needs to be recreated.

Re: Pipe Networks - 84-inch Structure

cano_haner — Mon, 31 Aug 2020 17:45:50 GMT

Que version de C3D estas utilizando actualemente ?

Quizas pueda ayudarte en algo...

Re: Pipe Networks - 84-inch Structure

Joe-Bouza — Mon, 31 Aug 2020 18:49:50 GMT

Um uh.. yep