topic Re: Subassembly and Multi Surface in Civil 3D Forum

Subassembly and Multi Surface

neam — Fri, 11 Dec 2020 15:16:32 GMT

How to define a sub-assembly such as an attachment to produce a corridor in two different surfaces?
Thank you for your guidance.

Re: Subassembly and Multi Surface

CivilFlow — Fri, 11 Dec 2020 16:21:50 GMT

Hello,

Try this out of the box subassembly:

Autodesk Civil 3D Help: DaylightMultipleSurface
https://help.autodesk.com/view/CIV3D/2020/ENU/index.html?guid=GUID-153AE7DD-0A8F-49ED-804B-AF9C82DA0D61

If you need something more custom, you can use Subassembly Composer to tailor it to your needs. This helpful video will help you get started.

Re: Subassembly and Multi Surface

neam — Sun, 13 Dec 2020 11:14:20 GMT

Hi Mike:

Thanks for your explanation.
I'm familiar with what you said about the subassembly.
But in this type of subassembly can only be done bench in a place where the surface changes.
And unfortunately I am not very professional in subassembly composer.

Re: Subassembly and Multi Surface

M_Obradovic — Sun, 13 Dec 2020 16:38:41 GMT

Hi neam

I create one simple Subassemby in SAC according your shetch. Please see attached PKT file (just rename ZIP to PKT when download) and check if will solve problem.

Regards

Re: Subassembly and Multi Surface

neam — Mon, 14 Dec 2020 05:19:47 GMT

Hi Milos

Two points:
1. Left and right side not clear ??
2. The target surfaces is not clear ??

Re: Subassembly and Multi Surface

M_Obradovic — Mon, 14 Dec 2020 06:38:12 GMT

Hi,

What version of Civil you use?

Can you open pkt file in SAC and save as with different name. Than try import again in C3D.

Re: Subassembly and Multi Surface

neam — Mon, 14 Dec 2020 08:10:14 GMT

Civil 3D 2019

Re: Subassembly and Multi Surface

neam — Mon, 14 Dec 2020 08:17:44 GMT

I open pkt file in SAC and save as with different name. and import in C3D 2019 but no change any thing

Re: Subassembly and Multi Surface

neam — Mon, 14 Dec 2020 09:10:06 GMT

in SAC every things is ok.

Re: Subassembly and Multi Surface

M_Obradovic — Mon, 14 Dec 2020 09:25:38 GMT

Here is the same pkt file just renamed in SAC 2019.

I hope now should work.

Re: Subassembly and Multi Surface

neam — Mon, 14 Dec 2020 10:22:46 GMT

Thanks you very very much milos.

Fortunately, it works well.

Only can the number of benches on the sides be variable?
Now puts two benches on the right and left side.
Because the depth of excavation varies in different sections.

Re: Subassembly and Multi Surface

M_Obradovic — Mon, 14 Dec 2020 11:54:10 GMT

I add 3 bench more. If you need more benches tell me but I hope it is enought.

Re: Subassembly and Multi Surface

M_Obradovic — Mon, 14 Dec 2020 12:04:22 GMT

here is PKT

Re: Subassembly and Multi Surface

neam — Tue, 15 Dec 2020 02:00:48 GMT

I agree with you

It seems to be enough

Thank you again

Re: Subassembly and Multi Surface

neam — Wed, 16 Dec 2020 08:39:08 GMT

Hi Milos

Is it possible to draw a feature line between sections during the production of the corridor?

Re: Subassembly and Multi Surface

M_Obradovic — Wed, 16 Dec 2020 13:28:19 GMT

Yes it is posible, you just need to create point code for point which you want to create feature line.

Re: Subassembly and Multi Surface

neam — Wed, 16 Dec 2020 16:16:44 GMT

In civil 3d corridor property or SAC???

Re: Subassembly and Multi Surface

M_Obradovic — Wed, 16 Dec 2020 18:23:50 GMT

In SAC. If you have same skethc with name of feature line post and I will create codes in SAC.

Re: Subassembly and Multi Surface

neam — Wed, 16 Dec 2020 18:59:21 GMT

Hi milos and thanks for attention

The same previous project,

Including bench in bench out and daylight

Re: Subassembly and Multi Surface

M_Obradovic — Wed, 16 Dec 2020 19:35:53 GMT

I hope that is ok but please check codes. And don't forget to import codes in CodeSetStyle in order to can create feature line in C3D.