topic Re: Conditional Horizontal Target Subassembly, Not showing the result of some sections. in Civil 3D Forum

Conditional Horizontal Target Subassembly, Not showing the result of some sections.

peter.barrett1234 — Tue, 02 Feb 2021 16:44:33 GMT

I have a subassembly I've created to put drop curb in at driveways in a road reconstruction I'm designing. The assembly works fine but it's giving me some strange results on some cross-sections. Some of the sections show as if there is no curb at all but just 5m prior there is proper curb. The assembly seems to be functioning as expected save the odd ball locations that either 1 or both sides show no curb at all. Any help would be greatly appreciated!

-Peter

Re: Conditional Horizontal Target Subassembly, Not showing the result of some sections.

peter.barrett1234 — Tue, 02 Feb 2021 16:49:14 GMT

Some other info as I can only include up to 3 screenshots per post

Re: Conditional Horizontal Target Subassembly, Not showing the result of some sections.

cwr-pae — Tue, 02 Feb 2021 17:56:46 GMT

Make sure you have assembly insertion sections that match the stationing of the sample lines.

(Select the corridor, right click, modify corridor section, add a section)

Re: Conditional Horizontal Target Subassembly, Not showing the result of some sections.

peter.barrett1234 — Tue, 02 Feb 2021 19:25:59 GMT

This was exactly it, Thank you I've been banging my head against this all day!