topic Re: ALIGNMENT SETTING OUT TABLE ISSUE in Civil 3D Forum

ALIGNMENT SETTING OUT TABLE ISSUE

Domziman — Sun, 20 Jun 2021 09:51:29 GMT

Hi Guys, In our company we have our Alignment Setting out table and its working without any issues on Alignment with no arcs, but as soon as you have a straight alignment the Setting out table is not correct. For some reason if you create your alignment labels for the table it does not want to read the end an a straight alignment. is there a way around this?

Re: ALIGNMENT SETTING OUT TABLE ISSUE

tcorey — Mon, 21 Jun 2021 15:51:26 GMT

Can you post your drawing and the examples of the report?

Re: ALIGNMENT SETTING OUT TABLE ISSUE

Kyle-L — Fri, 25 Jun 2021 14:04:30 GMT

You will need to create a unique setting out table style for straight alignments.

Basically you will need to create a line label that says something like "Start End", then in the table style you add the start and end coordinates to the "Value:Line" row for the columns that you have the coordinates in.

You can see this in action in the screenshot below. I hope it makes sense.

Re: ALIGNMENT SETTING OUT TABLE ISSUE

Domziman — Mon, 28 Jun 2021 03:57:07 GMT

I have done what you said but for some reason it keeps splitting the the start and end and keep giving them the same easting and northing.

Re: ALIGNMENT SETTING OUT TABLE ISSUE

Domziman — Mon, 28 Jun 2021 03:59:52 GMT

i found the problem, it was in the actual alignment label. this is sorted now thanks