topic Spot Elevations are not showing up correct in Civil 3D Forum

Spot Elevations are not showing up correct

Anonymous — Wed, 28 Jul 2021 21:11:15 GMT

When I try to get a spot elevation (ex: 110.25) is is showing up as .25. How do I get it to show up the number 110.25 example.

Re: Spot Elevations are not showing up correct

n_bartholomew — Wed, 28 Jul 2021 22:58:28 GMT

If you posted the drawing you are having trouble with, then it would be easier to help you with your issue.

It might be a number of things causing the problem, such as an individual label style component. an ambient drawing setting, or a surface that has been accidentally translated.

Re: Spot Elevations are not showing up correct

tony1978 — Thu, 29 Jul 2021 06:06:37 GMT

Good evening. If you go into your Label Style Composer/ Layout tab and click your Contents options, this will bring up the Text Component Editor. In the Properties tab check to make sure that your output is set to full and not Right of decimal. Let me know this works.

Re: Spot Elevations are not showing up correct

tony1978 — Thu, 29 Jul 2021 17:33:25 GMT

did this work for you?

Re: Spot Elevations are not showing up correct

Anonymous — Thu, 29 Jul 2021 17:44:42 GMT

Yes, it worked thank you