topic Using different assemblies for corridor region start and end in Civil 3D Forum

Using different assemblies for corridor region start and end

jayVVKFY — Fri, 10 Dec 2021 15:13:49 GMT

Is there a way to specify different assemblies, one assembly for the corridor region start and different assembly for the corridor region end? Civil 3D 2022

Re: Using different assemblies for corridor region start and end

Jeew-m — Fri, 10 Dec 2021 15:28:11 GMT

This answer may be too silly sometimes. 🙂

When you have your regions 0-100, 100-200 and, two separate assemblies (A1 & A2) what you expect is this.

You expect A2 to be at 100 instead of A1.

So what you should do is change 0-100 as 0-99.999.

Re: Using different assemblies for corridor region start and end

jayVVKFY — Fri, 10 Dec 2021 15:36:16 GMT

I'll try that, I'm not opposed to a simple (albeit silly 😁) solution. Thanks!