https://forums.autodesk.com/t5/civil-3d-forum/pavement-rehab/m-p/11278333#M51137 <P><A href="https://knowledge.autodesk.com/support/civil-3d/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/Civil3D-Subassembly-Ref/files/GUID-7438E6F5-8A25-4123-9D48-BAD5EB424895-htm.html" target="_blank" rel="noopener"><STRONG>Overlay mill and level 2 subassembly</STRONG></A> supports a separate target for crown target alignment.</P> Tue, 05 Jul 2022 16:13:11 GMT Jeew-m 2022-07-05T16:13:11Z https://forums.autodesk.com/t5/civil-3d-forum/pavement-rehab/m-p/11277978#M51136 <P>What assembly recommendations and approach to the corridor for a mil &amp; overlay project when the roadway centerline does not follow the crown of the road?&nbsp; This is a state project and requires the states centerline and stationing be used throughout the plans. &nbsp;Generally, the existing grades will be followed except where PROWAG will require corrections in the pavement running and cross slopes at ADA crossings too.&nbsp; There are a few areas that will require curb replacement due to deterioration.&nbsp; Sidewalks are being added or removed &amp; replaced along the entire project.</P><P>&nbsp;</P><P>C3D 2022, latest updates</P><P>WIN 10 Pro</P> Tue, 05 Jul 2022 14:15:54 GMT https://forums.autodesk.com/t5/civil-3d-forum/pavement-rehab/m-p/11277978#M51136 654work 2022-07-05T14:15:54Z https://forums.autodesk.com/t5/civil-3d-forum/pavement-rehab/m-p/11278333#M51137 <P><A href="https://knowledge.autodesk.com/support/civil-3d/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/Civil3D-Subassembly-Ref/files/GUID-7438E6F5-8A25-4123-9D48-BAD5EB424895-htm.html" target="_blank" rel="noopener"><STRONG>Overlay mill and level 2 subassembly</STRONG></A> supports a separate target for crown target alignment.</P> Tue, 05 Jul 2022 16:13:11 GMT https://forums.autodesk.com/t5/civil-3d-forum/pavement-rehab/m-p/11278333#M51137 Jeew-m 2022-07-05T16:13:11Z