topic Re: Geotechnical Modeler. Import *.csv files in Civil 3D Forum

Geotechnical Modeler. Import *.csv files

carlos.novalFUC49 — Tue, 23 Aug 2022 12:45:33 GMT

PROBLEMS TO IMPORT .CSV FILES

I am trying to import the data from the holes into the .csv files indicated but I always get the following error:

Error Message... The following fields are not found: Geology Code 2 Please verify that the fields exist in the following file and that the fields are separated by commas. C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv Error Details... System.Exception: The following fields are not found: Geology Code 2 Please verify that the fields exist in the following file and that the fields are separated by commas. C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.RetrieveFieldGeologicalDescriptionsFromCSV(String filePath) en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.ImportBoreholesFromCSV(String projectId, String projectName, String projectLocation, String csvFilesPath, String csCode) en Aecc.Gtm.AutoCADPlugin.ManageData.ManageDataPresenter.ImportBoreholeDataFromFile()

II attach the files used in case they can help me solve the error

Re: Geotechnical Modeler. Import *.csv files

Matheus-Lima — Tue, 30 Aug 2022 14:49:53 GMT

Hi @carlos.novalFUC49!

Take a look at the Easting and Northing in Location Details, "278.845.368" or something like that may lead to bugs. Try using only one decimal separator, like "278845.368". The borehole type you may define as "BH" for borehole or else, this is the category of the holes.

Also, in the Field Geological Descriptions.csv, "Geology Code2" is the name of the field. You may modify it to "Geology Code 2". That is the reason for the error message (YES, I hate those things too 😆). You may check your legend code values as well.

Hope it helps and let us know if does not work!

Re: Geotechnical Modeler. Import *.csv files

carlos.novalFUC49 — Mon, 29 Aug 2022 06:29:43 GMT

Hello Matheus,
Thank you for the solution sent. But, having made the changes you indicate, the import of csv files still does not work.
Now I get this error:

Error Message...

An unknown error occurred on line 2 while reading data from the following file.
C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv

Error Details...

System.Exception: An unknown error occurred on line 2 while reading data from the following file.
C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv ---> System.IndexOutOfRangeException: Índice fuera de los límites de la matriz.
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.RetrieveFieldGeologicalDescriptionsFromCSV(String filePath)
--- Fin del seguimiento de la pila de la excepción interna ---
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.RetrieveFieldGeologicalDescriptionsFromCSV(String filePath)
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.ImportBoreholesFromCSV(String projectId, String projectName, String projectLocation, String csvFilesPath, String csCode)
en Aecc.Gtm.AutoCADPlugin.ManageData.ManageDataPresenter.ImportBoreholeDataFromFile()

I don't understand what error you are referring to in line 2. There are no decimals in the numbers and I cannot detect the error you are referring to.
I would be grateful if you could tell me how to solve it.
Thank you very much.

Re: Geotechnical Modeler. Import *.csv files

ChicagoLooper — Mon, 29 Aug 2022 17:07:09 GMT

Hello @carlos.novalFUC49

In Field Geological Descriptions.csv keep the column named Legend Code, keep only the heading in row 1 named Legend Code but delete all the numbers in that column.

What happens?

For additional information, you may download Templates, additional reading material and sample drawings >>HERE<<.

Re: Geotechnical Modeler. Import *.csv files

carlos.novalFUC49 — Tue, 30 Aug 2022 06:21:40 GMT

Hello:

Thank you for your reply. I did what you indicated but the same thing keeps happening. I get this error:

Error Message...

An unknown error occurred on line 2 while reading data from the following file.
C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv

Error Details...

System.Exception: An unknown error occurred on line 2 while reading data from the following file.
C:\Users\carlos.noval\OneDrive - TSK\Documents\001816_Kilombero_Almacen_Azucar\02_C3D_Geotech_Mod\Field Geological Descriptions.csv ---> System.IndexOutOfRangeException: Índice fuera de los límites de la matriz.
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.RetrieveFieldGeologicalDescriptionsFromCSV(String filePath)
--- Fin del seguimiento de la pila de la excepción interna ---
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.RetrieveFieldGeologicalDescriptionsFromCSV(String filePath)
en Aecc.Gtm.DomainPersistence.Importers.CSVDataImporter.ImportBoreholesFromCSV(String projectId, String projectName, String projectLocation, String csvFilesPath, String csCode)
en Aecc.Gtm.AutoCADPlugin.ManageData.ManageDataPresenter.ImportBoreholeDataFromFile()

I will consult the link provided with the help documentation and redo the exercise to see if I can import the data again.

Re: Geotechnical Modeler. Import *.csv files

Matheus-Lima — Wed, 21 Sep 2022 14:43:25 GMT

Hi @carlos.novalFUC49.

The previous problem related was this one. Some Easting and Northing values with a lot of "." and some with just one "." (that is correct).

I can see that you solved that by looking at your last sent files.

The last detail now is with the Legend Code in Field Geological Descriptions.csv. In your file, the codes are "100" and "200". As the codes are based on AGS standards, there are no "100" and "200", as you may check here (page 74): https://www.ags.org.uk/content/uploads/2020/11/Electronic-Transfer-of-Geotechnical-Data-3rd-Edition-Addendum-1.pdf.

Therefore, you may substitute the "100" and "200" inputs with any code accepted by AGS, like "101" and "201". These codes are associated with colors, but you can change them in Civil 3D after import. Geotechnical Modeler accepts even if all strata have the same legend code, the condition is that this code is within AGS's table.

I edited here substituting with "101" and "201" and it worked just fine! You may change it in the best way to suit your needs. Files attached!

Re: Geotechnical Modeler. Import *.csv files

ChicagoLooper — Tue, 30 Aug 2022 14:33:48 GMT

@carlos.novalFUC49

With the limited information you've provided, it's hard to evaluate your problem. If you upload your files, Locations Details.csv and Field Geological Descriptions.csv, then the forum might have a better chance of resolving your issue.

The file named Orientation and Inclination.csv is not mandatory so try it again without the orientation file. Also, double check your csv format when saving Locations and Field Geo Description files. There is more than one type of csv extension. Try using this one:

Re: Geotechnical Modeler. Import *.csv files

lim.wendy — Wed, 07 Sep 2022 02:02:21 GMT

Hi @carlos.novalFUC49,

Welcome to the forum, and thanks for posting. @Matheus-Lima has provided a clue as to why this is not working due to your code's name, and @ChicagoLooper suggested trying it without the orientation file.

Have you got a chance to try them?

Remember to mark your posts as having an "Accepted Solution" if a solution is found as it helps other forum users with the same issue – so don't be shy about marking it as a solution! Accepted solutions get viewed more and help more users find the answer to their problems.

Re: Geotechnical Modeler. Import *.csv files

carlos.novalFUC49 — Wed, 21 Sep 2022 10:58:22 GMT

I used this option, but kept giving me the same mistake

Thanks for you support

Re: Geotechnical Modeler. Import *.csv files

j.ayalaCJF2S — Thu, 27 Oct 2022 14:19:52 GMT

This is the error I keep getting when trying to import a CSV into Geo modeler. Running 23 with current updates.

Error Message...

An item with the same key has already been added.

Error Details...

System.ArgumentException: An item with the same key has already been added.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Aecc.Gtm.Domain.CustomCSV.Record.CreateFromFields(List`1 fieldNames, List`1 recordFields)
at Aecc.Gtm.DomainPersistence.Importers.CustomCSVDataImporter.RetrieveDataFromFile(String customCsvFilePath, String fieldDelimiter, String textFieldQualifier, ProjectData& projectData, CustomCsvTableType tableType, String& error)
at Aecc.Gtm.DomainPersistence.Importers.CustomCSVDataImporter.ImportBoreholesFromCustomCsvData(Project projectInfo, FieldMapConfiguration fieldMapConfig)
at Aecc.Gtm.AutoCADPlugin.ManageData.ManageDataPresenter.ImportBoreholeDataFromCustomCSV()

Re: Geotechnical Modeler. Import *.csv files

Matheus-Lima — Sat, 29 Oct 2022 00:40:56 GMT

Hi @j.ayalaCJF2S.

I downloaded your files here, apparently, there are some blank columns in your CSV that might be the problem. I deleted them and managed to import the data.

I deleted some commas after "GeologyCode" using substitute ",,,,,," to "".

Before

After

With the command GM_DELETEPROJECT you may delete other projects with similar data. Also, a suggestion, change the column names and file names according to the Autodesk Sample files, this way you won't need to map the fields everytime. Or save a field name configuration.

With the Geology file I'm sending here, I imported the data. The same error appeared to me and nothing was imported. I created a new drawing in Civil 3D, came back to the first drawing and the boreholes were there 🤔

I think this is a bug or something.

Re: Geotechnical Modeler. Import *.csv files

j.ayalaCJF2S — Wed, 02 Nov 2022 12:52:39 GMT

Your modified geology file worked! And was able to import! Thank you for your help!

Re: Geotechnical Modeler. Import *.csv files

ChicagoLooper — Wed, 02 Nov 2022 14:10:55 GMT

Hi @j.ayalaCJF2S

You'll need to edit your files that uploaded in Post #10 of this thread.

Re: Geotechnical Modeler. Import *.csv files

Matheus-Lima — Wed, 02 Nov 2022 14:26:28 GMT

Good to know, @j.ayalaCJF2S! I noticed this issue pointed out by @ChicagoLooper only in BH13. I didn't see the other one and I forgot to include this matter in the post. It is important as he said to match the final depth between the files.

Best regards and keep up the good work 🙂

Re: Geotechnical Modeler. Import *.csv files

j.ayalaCJF2S — Wed, 02 Nov 2022 16:30:01 GMT

Got the CSV files corrected and they imported just fine. But why when I build out the surfaces by either legend or geology code, I only get these 4 surfaces and many holes with no surface tying to them?

Re: Geotechnical Modeler. Import *.csv files

Matheus-Lima — Sat, 05 Nov 2022 01:55:50 GMT

Hi @j.ayalaCJF2S, make sure each Legend Code / Geology Code has at least three samples so Civil 3D triangulates them as a surface. The more codes you have, the bigger the probability of an issue. These stratum surfaces are very simple, they are just a linear connection between the layers.

Re: Geotechnical Modeler. Import *.csv files

boldenownb68 — Mon, 16 Oct 2023 23:04:25 GMT

try opening the csv file in notepad. You get diff results than excel

Re: Geotechnical Modeler. Import *.csv files

boldenownb68 — Mon, 16 Oct 2023 23:10:43 GMT

I'm getting the same message. Can't get past this point.