topic Re: Problem in Profile view in Civil 3D Forum

Problem in Profile view

ATIFAHMED1234 — Tue, 04 Jul 2023 09:23:03 GMT

I want the grid in profile view to extend up to existing surface. I tried unchecking clip to highest level but it doesnt work.Image is attached .i want the grid upto blue profile line

Re: Problem in Profile view

acad_ahossain — Tue, 04 Jul 2023 14:01:36 GMT

Welcome Atefahmed,

You should (check all) Grid> Grid options to have reach the blue profile line.

But if still occurred, so you need to check the (existing surface) to complete any missing triangulations.

Best luck.

Re: Problem in Profile view

ATIFAHMED1234 — Tue, 04 Jul 2023 14:33:12 GMT

Hi,

Where to check grid options

Re: Problem in Profile view

acad_ahossain — Tue, 04 Jul 2023 14:36:50 GMT

From Profile view style> Grid tab.

Let me know if it worked!.

Re: Problem in Profile view

ATIFAHMED1234 — Tue, 04 Jul 2023 17:45:49 GMT

No it dooesnt work.I am attaching the file. Kindly check

Re: Problem in Profile view

acad_ahossain — Tue, 04 Jul 2023 18:00:50 GMT

Here you are, with attached file.

Hope it good now!

Re: Problem in Profile view

ATIFAHMED1234 — Tue, 04 Jul 2023 18:28:46 GMT

Thanks...Just one more thing..is there a way to clip grid to ground surface instead of proposed alignmnet

Re: Problem in Profile view

acad_ahossain — Tue, 04 Jul 2023 20:41:04 GMT

Sure there is, if you open profile view properties> profile tab> and select button for ground surface as picture below

It will be finished.

Re: Problem in Profile view

acad_ahossain — Tue, 04 Jul 2023 20:56:01 GMT

For (ground surface) don't forget to uncheck the highest profile from profile view style

Re: Problem in Profile view

ATIFAHMED1234 — Tue, 04 Jul 2023 22:49:29 GMT

thanks