topic Re: Try using scr script but it does not work. in Civil 3D Forum

Try using scr script but it does not work.

Wilson.WanH8Q64 — Wed, 04 Oct 2023 10:51:21 GMT

I try using scr to create line like this

Line 0,0,16.26 0,2000,16.26
Line 51.78,0,16.416 51.78,2000,16.416
Line 100.44,0,15.95 100.44,2000,15.95
Line 226.77,0,15.329 226.77,2000,15.329
Line 259.91,0,15.432 259.91,2000,15.432
Line 280.61,0,14.915 280.61,2000,14.915
Line 308.05,0,14.915 308.05,2000,14.915
Line 323.06,0,14.764 323.06,2000,14.764
Line 331.82,0,14.667 331.82,2000,14.667
Line 336.69,0,15.348 336.69,2000,15.348
Line 343.18,0,15.283 343.18,2000,15.283
Line 343.83,0,14.959 343.83,2000,14.959
Line 354.21,0,14.991 354.21,2000,14.991
Line 370.75,0,11.813 370.75,2000,11.813

Line 331.82,0,14.667 331.82,2000,14.667
Line 336.69,0,15.348 336.69,2000,15.348
Line 343.18,0,15.283 343.18,2000,15.283
Line 343.83,0,14.959 343.83,2000,14.959
Line 354.21,0,14.991 354.21,2000,14.991
Line 370.75,0,11.813 370.75,2000,11.813

This is the formula I used in excel

="Line "&D2&","&E2&","&F2&" "&G2&","&H2&","&I2&" "

But all the lines just are on the same location. Why does it happen?

Many thanks
Thanks.

Re: Try using scr script but it does not work.

Joe-Bouza — Wed, 04 Oct 2023 11:28:37 GMT

Don’t have cad at he moment. Do we enter on command line x,y,z or x y z?

the double space halfway down probably doesn’t help

did you save as MSDOS?

Re: Try using scr script but it does not work.

EBDBC3D — Wed, 04 Oct 2023 11:48:07 GMT

If you're trying to make separate lines, add a space at the end of each line so the "line" command restarts each time.

Re: Try using scr script but it does not work.

Joe-Bouza — Wed, 04 Oct 2023 13:08:15 GMT

ipasted the firs block to the command line and it works for me