topic Re: Trouble displaying minor station tick marks on alignment in Civil 3D Forum

Trouble displaying minor station tick marks on alignment

Keta_Engineering — Thu, 14 Aug 2025 21:28:36 GMT

I can't seem to display the tick marks denoting minor stations, i.e., x+50 etc., on an alignment.

I select the alignment and then 'edit alignment labels' but I'm unable to check the box to display the minor station labels (see screen shot).

I'm a modest user at best. Can someone help me out with this?

Re: Trouble displaying minor station tick marks on alignment

nkiakas — Fri, 15 Aug 2025 07:33:57 GMT

Hi @Keta_Engineering

Can you share your file to take a look?

Regards

Re: Trouble displaying minor station tick marks on alignment

RobertEVs — Fri, 15 Aug 2025 16:55:03 GMT

That is not a display checkbox. It is for when you do not want to label the entire length with minors you can change the start and end stations which is moot because you cant change the minor stations regardless like you can with the majors.

My guess is you have a layer issue check your minor style and see what layer it falls on.

Re: Trouble displaying minor station tick marks on alignment

Keta_Engineering — Fri, 15 Aug 2025 15:56:23 GMT

My apologies to all. Th tick mark was hidden under a corridor sample line 🙄. I swear I looked under these before I posted this thread.

Re: Trouble displaying minor station tick marks on alignment

RobertEVs — Fri, 15 Aug 2025 16:54:30 GMT

No apologies needed. I have posted plenty of times only to find out a couple minutes after submitting it was something easy.

Re: Trouble displaying minor station tick marks on alignment

kgharibUV8FJ — Sun, 28 Sep 2025 17:18:59 GMT

I have the same problem, but I can't see the tick marks. How can I turn them on (If they are off) or show them?