topic Re: Corridor feature line missing in Civil 3D Forum

Corridor feature line missing

JeffPaulsen — Fri, 01 Jun 2012 16:47:31 GMT

I created an assembly using BasicLaneTransition. When I apply it to my corridor I am not getting a feature line at the crown (center) of the road. I have used this subassembly on several other projects and have not had this issue. The only difference I can think of is that the other projects we started in C3D 2009 and this one is in 2012.

How do I get my feature line to show without adding a marked point?

Re: Corridor feature line missing

JeffPaulsen — Fri, 01 Jun 2012 16:56:40 GMT

I did a little more digging and it appears that the crown code no longer exists in the subassembly. See attached images from 2009 and 2012. Is there a way to put the codes back?

Re: Corridor feature line missing

sjgoessling — Fri, 01 Jun 2012 18:03:25 GMT

Select your pavement subassemly, and in the autocad properties where you adjust the parameters, turn Crown Point On Inside to on. Add code to code set and I believe that is all you need.

Re: Corridor feature line missing

JeffPaulsen — Fri, 01 Jun 2012 18:17:18 GMT

Thank you.

Setting "Crown Point on Inside" to Yes did the trick. The codes were added automatically.

I only set it to yes on one side so I did not get two feature lines at the crown.