topic Re: Creating Complex corridor in Subassembly Composer. in Civil 3D Forum

Creating Complex corridor in Subassembly Composer.

Soumya_K_G — Thu, 29 May 2025 05:49:34 GMT

I added an offset target to my subassembly (for example, to allow the edge of pavement or sidewalk to move left or right).

But when I change that offset value:

Some points move correctly(which connect using straight line).
Some points stay stuck ,don’t move at all (which has a a different shape other than a straight line mostly a complex shape ).

This makes the lines between them stretch or look broken, instead of everything sliding nicely.

How Can I solve this issue

Thanks in advance.

Re: Creating Complex corridor in Subassembly Composer.

will_young — Thu, 29 May 2025 07:59:07 GMT

Which subassembly is this?

Re: Creating Complex corridor in Subassembly Composer.

CivilFlow — Thu, 29 May 2025 22:31:04 GMT

make sure the point types that are not moving with offset targets in SAC are assigned the appropriate offset or elevation target override or are somehow linked to points that are. Need to share .pkt...images don't really help.

Re: Creating Complex corridor in Subassembly Composer.

nkiakas — Sun, 01 Jun 2025 20:10:53 GMT

Hi @Soumya_K_G

Can you share your PKT file to take a look?

Zip it before you attach it

Regards

Re: Creating Complex corridor in Subassembly Composer.

bim2BXKYR — Tue, 03 Jun 2025 09:32:43 GMT

It is a 2024 version

Re: Creating Complex corridor in Subassembly Composer.

bim2BXKYR — Tue, 03 Jun 2025 09:34:07 GMT

Thank you ,It works.

Re: Creating Complex corridor in Subassembly Composer.

Soumya_K_G — Tue, 03 Jun 2025 09:39:42 GMT

Thank you , the issue resolved.

Re: Creating Complex corridor in Subassembly Composer.

Soumya_K_G — Tue, 03 Jun 2025 09:43:59 GMT

@CivilFlow thank you, the issue is resolved as I created all the points relating to the Auxiliary point and assigned the target on the AP.