topic Re: Vertical Alignment Design Table in Civil 3D Forum

Vertical Alignment Design Table

Anonymous — Wed, 09 May 2018 14:27:55 GMT

I am looking for a way to create a table of my vertical alignment

to show pvi station, pvi erlevation, k value, HP ot LP station and HPor LP elevation,

Will appreciate your help

Re: Vertical Alignment Design Table

Jeew-m — Wed, 09 May 2018 15:35:53 GMT

Dear Friend,

If you need this report in excel/web file format you can use report manager.

Thanks

Re: Vertical Alignment Design Table

Anonymous — Wed, 09 May 2018 22:36:34 GMT

Thanks so much for your input.
I found a way which is more like what I want to create.
Through panorama, copy and paste it to an spread sheet.
Thanks again

HR

Re: Vertical Alignment Design Table

Anonymous — Wed, 30 May 2018 08:39:50 GMT

@Anonymous wrote:
Thanks so much for your input.
I found a way which is more like what I want to create.
Through panorama, copy and paste it to an spread sheet.
Thanks again

HR

Hi,can you show me steps by steps that u used through panorama?

Re: Vertical Alignment Design Table

Anonymous — Wed, 30 May 2018 16:22:57 GMT

Go to the profile view
Right click, and go to edit profile geometry (see image 2)
The profile layout tool will pop up
On the pop up select profile grid view, third icon from the right (see image 2)
Panorama will pop up, right click inside and select copy all
Then, paste it on your drawing as xcel format (see image 3)
Delete the columns you do not need and you done.

Hope this will help

Regards,
Hector Ruiz