topic Re: Pickfirst not working 2018 Civil 3D in Civil 3D Forum

Pickfirst not working 2018 Civil 3D

Anonymous — Fri, 17 Aug 2018 13:10:29 GMT

Pickfirst valve not working, although it is set to 1. Pickadd, qaflags and all other variables are set correctly.

Anytime I select a feature line, surface, profile, cross section, then choose a command from the ribbon bar, it drops the command and I must re-select the items. Any help would be greatly appreciated, its driving me crazy!

Re: Pickfirst not working 2018 Civil 3D

AlmasSuljevic — Mon, 20 Aug 2018 16:00:59 GMT

Do you happen to have Raster Design installed too? Do you have ability to select with SHIFT+CLICK? Can you check MAPIOPTIONS and IOPTIONS settings to see if they are allowing you to make selections?

In command line run the IOPTIONS
Go to the User Preferences tab
Uncheck the toggle Shift+Left Click Image Select
Run MAPIOTIONS command
Go to General tab and uncheck “Shft+Left Click Image Select"

Let me know if this helps.

Re: Pickfirst not working 2018 Civil 3D

wfberry — Mon, 20 Aug 2018 16:03:37 GMT

Gee Almas:

I don't recall "seeing" you in some time.

Bill

Re: Pickfirst not working 2018 Civil 3D

Anonymous — Mon, 20 Aug 2018 16:08:44 GMT

Unfortunately, that didn't work. But yes, Raster Design is installed as well.

Re: Pickfirst not working 2018 Civil 3D

AlmasSuljevic — Mon, 20 Aug 2018 16:21:38 GMT

Will setting PICKADD to 2 (default value) make any difference? So when you are trying to select can you use "R" for remove or "A" for add? Is that being ignored too?

Re: Pickfirst not working 2018 Civil 3D

Anonymous — Mon, 20 Aug 2018 16:24:04 GMT

Pickadd is set to 2 already.

Re: Pickfirst not working 2018 Civil 3D

Anonymous — Mon, 27 Aug 2018 13:06:28 GMT

Cleaning and deleting the registry files worked temporally, but the next day I had to completely uninstall Autodesk and reinstall.