topic Re: mapiinsert image background transparency setting in Civil 3D Forum

mapiinsert image background transparency setting

kwilktrihydro — Wed, 26 Feb 2020 16:51:41 GMT

First, using the command mapiinsert I bring in the raster UAS image. As you can see below. When I first bring it in the background color of the image is black.

Then I go to the image properties, set the Background Transparency, to “Yes”. Then I change the transparency color to “black”.

Everything works as expected. As you can see below the background is removed from the raster image.

However, if I then save and close the drawing – when I re-open the drawing the background transparency of the image has returned and I again have to go into the image properties to set the back ground transparency color to black.

Is there a system setting that controls this? I don’t remember having this issue in the past and am thinking there must be.

Thank you in advance for any help!

Kelby

Re: mapiinsert image background transparency setting

jefflambert9091 — Wed, 26 Feb 2020 20:21:53 GMT

We had that happen here. Double check that you have all your updates and then we had to repair. FYI, we are in 2018.

Re: mapiinsert image background transparency setting

lynn_zhang — Mon, 02 Mar 2020 07:00:46 GMT

Hello @kwilktrihydro ,

Just checking to see if your problem has been solved. Did the response from above help answer your question? Let us know if you still need help.

Re: mapiinsert image background transparency setting

kwilktrihydro — Sun, 22 Mar 2020 04:11:28 GMT

Hey I got all of my updates installed finally. Sorry it takes out IT awhile to get to updates sometimes.

That being said I still have the problem. However, this may need to get moved to Raster Design. From asking around my work it sounds like this is something that is happening only to those of us that have Autodesk Raster Design installed. I've found a work around using image trim, but I'm still curious if it's a setting somewhere.

Thanks again for your assistance.

Re: mapiinsert image background transparency setting

ChicagoLooper — Sun, 22 Mar 2020 11:52:36 GMT

Check whether 0 or 1.

For ‘ON’ make it like this:

TRANSPARENCYDISPLAY=1.

Re: mapiinsert image background transparency setting

MikeKitchen5860 — Sun, 06 Aug 2023 18:35:58 GMT

I have this problem... in 2023! It's a client logo which resets its transparency color back to black every time I reload. I agree, it would be great if all clients used blocks for their logos. But most people love using tiffs, pngs, etc... for reasons. And no, none of the suggestions provided thus far make the problem go away. Hey, @autodesk, has anyone fixed this yet?!

Mike Kitchen

Osprey Engineering Inc.

C3D 2023.2.3

Re: mapiinsert image background transparency setting

Ultimately — Fri, 14 Jun 2024 17:15:08 GMT

Still a issue in editions 2022, 2023, 2024, and 2025 that I've tested recently.

Re: mapiinsert image background transparency setting

pendean — Fri, 14 Jun 2024 20:43:40 GMT

@Ultimately wrote: @kwilktrihydro
Still a issue in editions 2022, 2023, 2024, and 2025 that I've tested recently.

You yourself(s) (and everyone else that wants it fixed) will need to report it to Autodesk for a resolution

Post here is the ideal way https://forums.autodesk.com/t5/civil-3d-ideas/idb-p/31

If it's not a bug, just a workflow, you yourself(s) will need to open a support case with Autodesk if you are on subscription to seek out Autodesk Support's help to confirm:
https://www.autodesk.com/support/account/manage/use/support#:~:text=com/plans.-,Contact%20support,-Select%20a%20path

HTH