topic Re: Customize Cross Section in Civil 3D Customization Forum

Customize Cross Section

erez.m — Tue, 10 May 2022 07:13:12 GMT

Hello,

I would appreciate your help with pointing me to the menu where I can turn off the marker at the CL's Insertion point on a section view

My other question is regarding the Section's frame:

I can't see it in layout,

I checked the layers and it's not turned off in any way.

Thank you for your help.

回复： Customize Cross Section

465340553 — Tue, 10 May 2022 08:30:14 GMT

Modify the assembly style，

Re: Customize Cross Section

erez.m — Tue, 10 May 2022 08:35:58 GMT

Thank you for your reply,

I'm still trying to figure out two things about the section Drawing buffer,

1. How to show it on Layout.

2. If there is a possibility to adjust it in a permanent way so it'll be like a frame to the cross section, something like this (i adjusted it manually):

回复： Customize Cross Section

465340553 — Tue, 10 May 2022 09:01:35 GMT

Can you use the axis to form the frame?

not use the dafting buffers.

Re: Customize Cross Section

cwr-pae — Wed, 11 May 2022 18:32:31 GMT

There is no way to make the drafting buffer print. You can make a border for the profile view through the view style. You can control the size of the drafting buffer under the CreateSectionView node of the Commands branch of the Section View tree.