https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676191#M26273 Sandy<BR /> In quantity takeoff report C3D colculate each crossection Cut and Fill area, <BR /> but I need get cut fill area not of rossection but of plan<BR /> <BR /> <SWATFOR> wrote in message news:5209127@discussion.autodesk.com...<BR /> Darius,<BR /> I don't know if this will help... but you can get a quantity takeoff report<BR /> from the section menu to calculate cut and fill for each cross-section<BR /> created.<BR /> Sandy<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5208480@discussion.autodesk.com...<BR /> Station/Elevation from profiles I have and I did it winth NET aplication it<BR /> is simple, now I traing get section data to colculate volumes and Plan<BR /> areas, betveen 2 surfaces<BR /> <BR /> "TomD" <TDIVITTIS> wrote in message<BR /> news:5208028@discussion.autodesk.com...<BR /> You might be able to get them from one of the reports, if that will work.<BR /> <BR /> I haven't done anything with sections, but getting Station/Elevation data<BR /> from profiles is quite simple with VBA.<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5207305@discussion.autodesk.com...<BR /> Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show<BR /> in picture, the one surface ic design surface and the next is egzisting<BR /> surface, and I need this data in all crossections. or it is posible get in<BR /> C3D using programing tools<BR /> Thanks<BR /> Darius</DARIENAS></TDIVITTIS></DARIENAS></SWATFOR> Mon, 19 Jun 2006 04:06:17 GMT Anonymous 2006-06-19T04:06:17Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676187#M26269 Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show <BR /> in picture, the one surface ic design surface and the next is egzisting <BR /> surface, and I need this data in all crossections. or it is posible get in <BR /> C3D using programing tools<BR /> Thanks<BR /> Darius Thu, 15 Jun 2006 13:28:57 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676187#M26269 Anonymous 2006-06-15T13:28:57Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676188#M26270 You might be able to get them from one of the reports, if that will work.<BR /> <BR /> I haven't done anything with sections, but getting Station/Elevation data <BR /> from profiles is quite simple with VBA.<BR /> <BR /> "Darius" <DARIENAS> wrote in message <BR /> news:5207305@discussion.autodesk.com...<BR /> Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show<BR /> in picture, the one surface ic design surface and the next is egzisting<BR /> surface, and I need this data in all crossections. or it is posible get in<BR /> C3D using programing tools<BR /> Thanks<BR /> Darius</DARIENAS> Thu, 15 Jun 2006 19:37:18 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676188#M26270 Anonymous 2006-06-15T19:37:18Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676189#M26271 Station/Elevation from profiles I have and I did it winth NET aplication it <BR /> is simple, now I traing get section data to colculate volumes and Plan <BR /> areas, betveen 2 surfaces<BR /> <BR /> "TomD" <TDIVITTIS> wrote in message <BR /> news:5208028@discussion.autodesk.com...<BR /> You might be able to get them from one of the reports, if that will work.<BR /> <BR /> I haven't done anything with sections, but getting Station/Elevation data<BR /> from profiles is quite simple with VBA.<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5207305@discussion.autodesk.com...<BR /> Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show<BR /> in picture, the one surface ic design surface and the next is egzisting<BR /> surface, and I need this data in all crossections. or it is posible get in<BR /> C3D using programing tools<BR /> Thanks<BR /> Darius</DARIENAS></TDIVITTIS> Fri, 16 Jun 2006 04:32:30 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676189#M26271 Anonymous 2006-06-16T04:32:30Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676190#M26272 Darius,<BR /> I don't know if this will help... but you can get a quantity takeoff report <BR /> from the section menu to calculate cut and fill for each cross-section <BR /> created.<BR /> Sandy<BR /> <BR /> "Darius" <DARIENAS> wrote in message <BR /> news:5208480@discussion.autodesk.com...<BR /> Station/Elevation from profiles I have and I did it winth NET aplication it<BR /> is simple, now I traing get section data to colculate volumes and Plan<BR /> areas, betveen 2 surfaces<BR /> <BR /> "TomD" <TDIVITTIS> wrote in message<BR /> news:5208028@discussion.autodesk.com...<BR /> You might be able to get them from one of the reports, if that will work.<BR /> <BR /> I haven't done anything with sections, but getting Station/Elevation data<BR /> from profiles is quite simple with VBA.<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5207305@discussion.autodesk.com...<BR /> Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show<BR /> in picture, the one surface ic design surface and the next is egzisting<BR /> surface, and I need this data in all crossections. or it is posible get in<BR /> C3D using programing tools<BR /> Thanks<BR /> Darius</DARIENAS></TDIVITTIS></DARIENAS> Fri, 16 Jun 2006 16:07:11 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676190#M26272 swatfor_PDCOG 2006-06-16T16:07:11Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676191#M26273 Sandy<BR /> In quantity takeoff report C3D colculate each crossection Cut and Fill area, <BR /> but I need get cut fill area not of rossection but of plan<BR /> <BR /> <SWATFOR> wrote in message news:5209127@discussion.autodesk.com...<BR /> Darius,<BR /> I don't know if this will help... but you can get a quantity takeoff report<BR /> from the section menu to calculate cut and fill for each cross-section<BR /> created.<BR /> Sandy<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5208480@discussion.autodesk.com...<BR /> Station/Elevation from profiles I have and I did it winth NET aplication it<BR /> is simple, now I traing get section data to colculate volumes and Plan<BR /> areas, betveen 2 surfaces<BR /> <BR /> "TomD" <TDIVITTIS> wrote in message<BR /> news:5208028@discussion.autodesk.com...<BR /> You might be able to get them from one of the reports, if that will work.<BR /> <BR /> I haven't done anything with sections, but getting Station/Elevation data<BR /> from profiles is quite simple with VBA.<BR /> <BR /> "Darius" <DARIENAS> wrote in message<BR /> news:5207305@discussion.autodesk.com...<BR /> Hi,<BR /> I need points x,y,z of crossection of surface in its break points, like show<BR /> in picture, the one surface ic design surface and the next is egzisting<BR /> surface, and I need this data in all crossections. or it is posible get in<BR /> C3D using programing tools<BR /> Thanks<BR /> Darius</DARIENAS></TDIVITTIS></DARIENAS></SWATFOR> Mon, 19 Jun 2006 04:06:17 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676191#M26273 Anonymous 2006-06-19T04:06:17Z https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676192#M26274 Darius,<BR /> <BR /> look at the report under corridors for the "slope stake report" for an <BR /> example. It should show you how to dig the points and links out of the <BR /> corridor model. Once you have the links, you'll need to match the links from <BR /> one station to the next to get your plan area.<BR /> <BR /> Regards.<BR /> <BR /> Peter Funk<BR /> Autodesk, Inc. Mon, 19 Jun 2006 17:08:05 GMT https://forums.autodesk.com/t5/civil-3d-customization-forum/geting-data-from-crossections/m-p/1676192#M26274 Anonymous 2006-06-19T17:08:05Z