topic How to use Distributed Resistances function in CFD Forum

How to use Distributed Resistances function

Anonymous — Tue, 21 Jul 2020 09:22:39 GMT

Hello

I would like to use the Distributed Resistances function of the CFD to implement the filter.

Can the filter function be implemented with the free area ratio function?

Or is there another way?

And I created and tested Distributed Resistance Models in the Verification category.

I wonder how to judge this result.

So I'm wondering how the Distributed Resistances feature works well as a filter.

Thank you.

Re: How to use Distributed Resistances function

benoit.neu-faber — Wed, 29 Jul 2020 09:12:08 GMT

Hi @Anonymous

I would suggest you to have a look to the following link :

http://help.autodesk.com/view/SCDSE/2019/ENU/?guid=GUID-BCF33737-497B-47B8-867B-5DF174A7F9D1

Hope this help.

Benoit Neu-Faber

Autodesk Service Provider

https://www.linkedin.com/in/benoit-neu-faber/

Please accept solution and give likes if applicable

Re: How to use Distributed Resistances function

Anonymous — Tue, 25 Aug 2020 08:33:59 GMT

Hello benoit.neu-faber

Thanks for the answer.

What I wondered about is checking whether the Distributed Resistances feature works.

I set up the Distributed Resistances function in the middle, input the velocity in the inlet, and the pressure in the outlet, and calculate.

As a result, the outlet speed is the same as the inlet speed (steady state).

How can I verify that the Distributed Resistances function is working properly in the calculations now?