https://forums.autodesk.com/t5/cfd-forum/creo-7-0-and-8-0-support/m-p/10731708#M2766 <P>Hi,</P><P>&nbsp;</P><P>Does any know if the CFD 2021/2022 is going to support Creo 7.0 and 8.0 in the near future. I used this program in the past but it seem there little support or development for this program anymore?</P><P>&nbsp;</P><P>Also some should fix the typo error with "#" in the cfd_2021.txt that been there for years.</P> Wed, 03 Nov 2021 03:56:02 GMT Anonymous 2021-11-03T03:56:02Z https://forums.autodesk.com/t5/cfd-forum/creo-7-0-and-8-0-support/m-p/10731708#M2766 <P>Hi,</P><P>&nbsp;</P><P>Does any know if the CFD 2021/2022 is going to support Creo 7.0 and 8.0 in the near future. I used this program in the past but it seem there little support or development for this program anymore?</P><P>&nbsp;</P><P>Also some should fix the typo error with "#" in the cfd_2021.txt that been there for years.</P> Wed, 03 Nov 2021 03:56:02 GMT https://forums.autodesk.com/t5/cfd-forum/creo-7-0-and-8-0-support/m-p/10731708#M2766 Anonymous 2021-11-03T03:56:02Z https://forums.autodesk.com/t5/cfd-forum/creo-7-0-and-8-0-support/m-p/10736546#M2767 <P>Hello,</P><P>&nbsp;</P><P>CFD 2021 doesn't officially support creo 7 or 8, but does import creo7 .prt files but not .asm files.&nbsp;&nbsp;</P><P>&nbsp;</P><P>CFD is actually built from the GRANITE kernel.&nbsp; I'm not sure if this has to get updated at some point to work with other files types as well as Creo.&nbsp; If CFD doesn't need an updated GRANITE kernel to work with other Autodesk software I don't know if they will support later releases of Creo unfortunately.</P><P>&nbsp;</P><P><a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/831292">@marwan_azzam</a>&nbsp;do you have a product roadmap you are able to share with us end users?</P> Thu, 04 Nov 2021 19:55:31 GMT https://forums.autodesk.com/t5/cfd-forum/creo-7-0-and-8-0-support/m-p/10736546#M2767 bob.schlosser 2021-11-04T19:55:31Z