topic Re: Installation Problem - Help me in CFD Forum

Installation Problem - Help me

Anonymous — Sat, 30 Jun 2012 10:42:58 GMT

i have istalled with stand alone licence

I installed Network licence manager

Re: Installation Problem - Help me

Anonymous — Mon, 02 Jul 2012 09:39:25 GMT

I am also facing this exact problem. I installed Autodesk Simulation CFD 2013 as stand alone but when I start the application, the software seems to look for the network licence. FYI, the machine initially had LMTools installed for other Autodesk Software, I don't know if there is any relation to this. What might be the issue?

Re: Installation Problem - Help me

apolo_vanderberg — Mon, 02 Jul 2012 15:29:29 GMT

Have the two of you looked at the following Knowledge Base Article?

ADLM Startup Failure

Re: Installation Problem - Help me

Anonymous — Mon, 02 Jul 2012 19:47:39 GMT

thank you for the solution.Now I am able to activate the liscense.

but when launching cfd simulation it has stopped working.

please help me i actually need urgently

Re: Installation Problem - Help me

apolo_vanderberg — Mon, 02 Jul 2012 20:29:23 GMT

The interface crashes? Or does it give an error?

You said when launching , are you launching a model frmo CAD to CFD? Or just opening the UI on its own?

Re: Installation Problem - Help me

Anonymous — Mon, 02 Jul 2012 20:36:06 GMT

the interface crashes.either i launch from solid works or launching by double clicking the icon autodesk simulation cfd 2013.

Re: Installation Problem - Help me

apolo_vanderberg — Mon, 02 Jul 2012 20:39:09 GMT

Can you give me some details on the graphics hardware you're using?

When you installed this you did (for Vista / Win7) right-click and "Run as Admin" even if you are an Administrator?

Apolo

Re: Installation Problem - Help me

Anonymous — Mon, 02 Jul 2012 20:42:05 GMT

ya i did by right clicking. hardware: 4gb RAM, 1GB ATI graphic card,

Re: Installation Problem - Help me

Royce_adsk — Mon, 02 Jul 2012 21:40:45 GMT

My guess to the solution would be covered in this up and ready article:

http://upandready.typepad.com/up_and_ready/2012/06/autodesk-simulation-cfd-2013-crashes-at-startup.html

Also make sure that 'TabletInputService' or 'Tablet PC Input Service' is disabled in your services list in Windows.

-Royce

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 06:44:07 GMT

i couldnt resolve the issue.please help me. i have attached the image of the problem

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 09:29:43 GMT

actually i unistalled the autodesk and then i again installed it.now its working fine

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 09:31:11 GMT

thank you very much dude

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 14:55:03 GMT

now the problem is when i am launching autodesk cfd simulation from solid works it is not even responding

Re: Installation Problem - Help me

Royce_adsk — Tue, 03 Jul 2012 15:05:20 GMT

Could you post your log file?

It is located here

C:\Users\username\AppData\Local\Autodesk\Simulation CFD 2013\Simulation CFD.log

Thanks,

Royce

Re: Installation Problem - Help me

Royce_adsk — Tue, 03 Jul 2012 15:07:31 GMT

When testing the launching from Solidworks follow these two steps first

1) Need to launch from a local drive. Launching from the network can cause issues.

2) Test with something simple like a block first.

-Royce

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 15:16:05 GMT

i sending the file.plese look into it thank you,

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 15:17:26 GMT

i am sending the log file

Re: Installation Problem - Help me

Anonymous — Tue, 03 Jul 2012 15:39:28 GMT

even though i try with the blocks, i couldnt launch it.

actually when launch the autodesk cfd simulation in active mode in solid works it is not responding.

Re: Installation Problem - Help me

MohsenHessami — Wed, 04 Jul 2012 12:42:23 GMT

Have tried to install and run CFD with other Adesk software. Tried everything you have mentioned here and start even a topic ( http://forums.autodesk.com/t5/Installation-Licensing/Cannot-initialze-License-manager-ADLM-startup-failed/td-p/3398417 ) and did everything is mentioned there. Nothing works for me so PLEASE HELP:

Today I installed a new HD with fresh windows7 installation and first Software is CFD. I attach some pictures and logs please se if you can help me.

Re: Installation Problem - Help me

MohsenHessami — Wed, 04 Jul 2012 12:43:27 GMT

Hi again,

As you cad upload only 3 files here is the rest.