topic Re: A problem with void filling in CFD Forum

A problem with void filling

Anonymous — Tue, 09 Jan 2018 18:58:40 GMT

Hello everyone !

I Have a problem with my model , I'm trying to fill the void with water. But I can't creat the liquid volume even thought I can creat surfaces at the outlet and inlet of the liquid. I made sure there is no void between the tube and the cylinder . Thank you in advance for your help !

Re: A problem with void filling

matt.bemis — Tue, 09 Jan 2018 20:44:01 GMT

Hi @Anonymous,

Thanks for reaching out to us on the forums! This usually means there's some small sliver gap so there is not a true, separate internal volume. Please check out this article on how to find the gap.

Please let me know how it works.

Thanks,

Re: A problem with void filling

Anonymous — Tue, 16 Jan 2018 19:26:19 GMT

Hello ,

Sorry for the late replay ! Yes I can see now why the voids are not filled . Thank you

Re: A problem with void filling

matt.bemis — Tue, 16 Jan 2018 19:27:26 GMT

Hi @Anonymous,

Fantastic! Best of luck with the modeling!

Thanks,