topic Re: Publish Settings - All the worksets in BIM 360 Support Forum

Publish Settings - All the worksets

Anonymous — Tue, 05 Feb 2019 02:51:01 GMT

I was wondering if it changes something to publish with all the workset open and close.

The problem is this:

We have Model A (350MB) with 10Models linked in it.

The publish takes more than 24h. Is there a way in which we can publish in a faster way the model (in 30min for example). I thought that maybe the worksets can affect the publish but I don't really think so. Any other ideas or suggestions?

Kind Regards

Re: Publish Settings - All the worksets

don_simpson — Wed, 13 Feb 2019 19:29:32 GMT

Hello alberto.tono,

Thank you for contacting Autodesk. Is Model A and all 10 models that are linked to Model A ones that were published into BIM 360 Document Management through Revit Cloud Worksharing?

Does the model publish actually complete successfully, despite the extended processing time?

Are there any error messages returned?

Can viewables be opened without issue?

Thanks,
Don

Re: Publish Settings - All the worksets

Anonymous — Thu, 14 Feb 2019 06:57:03 GMT

Thanks a lot Don for the reply,

It was published correctly at the end. We were able to optimize the time drastically, placing all the links in the Desktop Connectors. Having files in the Desktop Connector help a lot in the publishing. (If the link files can stay in a static version in the Desktop Connector).

Kind Regards

Re: Publish Settings - All the worksets

don_simpson — Thu, 14 Feb 2019 15:16:35 GMT

I assume that Model A was added into Document Management using Revit Cloud Worksharing. The other 10 models were them ultimately added directly into Document Management, through either the web or Desktop Connector. You then linked the 10 models to the Model A within Revit by linking through Desktop Connector. Is that correct?

Assuming the above is the case, the linked models would only be updated if you added a new version of the model into the same folder path in which the model can currently be found. This could be done either through the Document Management web application or through Desktop Connector. The linked models would otherwise not change.

Please let me know if you have additional questions. Otherwise, please accept this solution.

Regards,

Don

Re: Publish Settings - All the worksets

don_simpson — Fri, 15 Feb 2019 13:34:31 GMT

Hello alberto.tono,

Please let me know if my previous post answered any remaining questions that you had. If so, please click the Accept Solution button to confirm.

Thanks,

Don

Re: Publish Settings - All the worksets

Anonymous — Fri, 15 Feb 2019 15:59:19 GMT

If you have any ideas how is possible to speed up the process of publishing model would be nice. The workaround to place static links in the Desktop Connector was the solution that we found.