https://forums.autodesk.com/t5/bim-360-support-forum/pdf-zoom-is-improved/m-p/9158482#M11118 <P>SO I am here at AU - and was excited to here they had made the PDF zoom much as it was before in C4R - where you could zoom in an infinite amount and snap to measurements and not continually have to re-calibrate a PDF each time you opened it......Problem is - it does not appear to be true for existing PDF sets already posted in a project hub.&nbsp; So this is a problem as projects which could have many sets already uploaded - you still cannot zoom in close, snap and avoid repeated calibration.&nbsp; Please let me know if what I am experiencing is indeed what is happening.&nbsp; I prefer to not have to re-upload hundreds of sheet sets to take advantage of the fixed PDF features.</P> Wed, 20 Nov 2019 22:55:32 GMT Anonymous 2019-11-20T22:55:32Z https://forums.autodesk.com/t5/bim-360-support-forum/pdf-zoom-is-improved/m-p/9158482#M11118 <P>SO I am here at AU - and was excited to here they had made the PDF zoom much as it was before in C4R - where you could zoom in an infinite amount and snap to measurements and not continually have to re-calibrate a PDF each time you opened it......Problem is - it does not appear to be true for existing PDF sets already posted in a project hub.&nbsp; So this is a problem as projects which could have many sets already uploaded - you still cannot zoom in close, snap and avoid repeated calibration.&nbsp; Please let me know if what I am experiencing is indeed what is happening.&nbsp; I prefer to not have to re-upload hundreds of sheet sets to take advantage of the fixed PDF features.</P> Wed, 20 Nov 2019 22:55:32 GMT https://forums.autodesk.com/t5/bim-360-support-forum/pdf-zoom-is-improved/m-p/9158482#M11118 Anonymous 2019-11-20T22:55:32Z