topic Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT in AutoCAD Plant 3D Forum

PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Tue, 03 Oct 2017 08:17:01 GMT

Hello,

We inserted several insulation symbols on straight pipe.

When we create the isometric it's ok, all symbols insulation appear (print-single-sheet-no-break-point.png)

When we inserted a break point in 3D model, Plant 3D created 2 sheet isometric,

In the first sheet, symbol insulation appear (print-sheet-1-with-break-point.png) but the second sheet (print-sheet-1-with-break-point.png)

the symbol insulation not appear ! Why ?

In pipe way the user created several sheet with break point function for the understanding of isometrics.

How to make multiple symbols insulation on straight piping ?

thank you.

Best regards.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Dadspackard — Tue, 03 Oct 2017 13:18:35 GMT

@Anonymous,

Do you have the Insulation symbol on both the other sides of your break point.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Wed, 04 Oct 2017 06:19:45 GMT

Hello,
Yes, I have the insulation symbol on both the order sides of my break point.
See attached file (hard copy 3D model).
Thank you.
Best regards.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Ruffy85 — Wed, 04 Oct 2017 16:59:59 GMT

Sergej,

to help, please send us the pcf file

which Version you are using?

Any Errors after creation?

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Thu, 05 Oct 2017 06:45:45 GMT

Hello,
The version we use 2017 (in 2016 version it's same problem).
See attached file Test.pcf
Thank you.
Best regards.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Ruffy85 — Thu, 05 Oct 2017 07:33:27 GMT

forgot the file?

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Thu, 05 Oct 2017 07:42:45 GMT

Hello ?
No forgot the file.
See attached files test.pcf and test.zip (include .pcf)
The attachement may have been deleted by messaging !!
Best regards.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Bernd.Gerstenberger — Thu, 05 Oct 2017 12:25:57 GMT

I am not able to reproduce this issue. Can you confirm that on both sides of the break point the insulation symbol was set?

Alternatively you can show insulation by opening project setup, node "Isometric DWG Settings - Title Block and Display". Check there "Show insulation on isometric drawings". Of course this needs before that you have filled e.g. in data manager, sorted by "Order by Area", for the pipelines some values for insulation.

Hope this helps

Regards

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Bernd.Gerstenberger — Thu, 05 Oct 2017 12:29:01 GMT

I noted that my screen was not updated with all posts correctly. So I got already the answer of my first question. But I also cannot see any additional files attached to the post as the 3 snapshots from the beginning. All other files are missing.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Thu, 05 Oct 2017 12:37:45 GMT

Hi,
ZIP attached file contains all pictures.
Best regards.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Ruffy85 — Thu, 05 Oct 2017 19:20:15 GMT

we do not see any zip Files

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

dgorsman — Thu, 05 Oct 2017 21:40:57 GMT

Hey all...

Do not reply from email systems. In order for formatting, attachments, and so on to "stick" you need to log into the website.

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Anonymous — Fri, 06 Oct 2017 07:15:45 GMT

Hello,
Since you cannot receive attachments !
I attached ZIP file in website support Autodesk management, I open new case N°13453545
Best regards

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Bernd.Gerstenberger — Fri, 06 Oct 2017 15:03:37 GMT

Dear Serge,

I am able now to reproduce the issue (don't know why I couldn't before). I have logged this to our development department.

Regards

Re: PLANT 3D ISOMETRIC WITH INSULATION SYMBOL AND BREAK POINT

Ruffy85 — Fri, 06 Oct 2017 15:23:04 GMT

ok i can reproduce that issue in 2016.

Second iso has no Insulation symbol

-> create a pipe, create a split point on the pipe, create 2 insulation symbols left and right from the break point.

Result. One iso shows one insulation symbol, the other one shows not.

After deleting the break point, both insulationsymbols are showed fine.

But i get a warning when i produce iso with break point

ISO-Erstellungsstartzeit: 06.10.2017 17:16:24
ISO-Erstellungsendzeit: 06.10.2017 17:16:29
Dauer:                 00:00:04
Ausgabeordner:            C:\Users\xxx\AppData\Roaming\Autodesk\Autodesk AutoCAD Plant 3D 2016\R20.1\deu\DefaultProject\Isometric\Final_ANSI-B\ProdIsos\Drawings
-------------------------------------------------------------------------------
1 isometrische Zeichnung(en) wurde(n) mit gemeldeten Fehlern erstellt (siehe unten):
C:\Users\xxx\AppData\Roaming\Autodesk\Autodesk AutoCAD Plant 3D 2016\R20.1\deu\DefaultProject\Isometric\Final_ANSI-B\PCFs\TEST.pcf
-------------------------------------------------------------------------------
INFO    - Eingabe wird geladen: C:\Users\xxx\AppData\Roaming\Autodesk\Autodesk AutoCAD Plant 3D 2016\R20.1\deu\DefaultProject\Isometric\Final_ANSI-B\PCFs\TEST.pcf
INFO    - 1 Modell(e) geladen.
INFO    - Wird verarbeitet: TEST.
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
INFO    - Modellbasierte Teilung wurde durchgeführt. Das Modell wurde in 2 Modelle geteilt.
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - ((1,19733400394439,3,77622050412303,-187,417803924934),(10,3026659960556,9,78627949587697,-179,xxx-xxxxxxxx)) Overlaps no draw area <(0,6875,9,4375),1,375,0,875>
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - ((1,18747425647943,3,77052797627004,-187,360682921011),(10,3125257435206,9,79197202372996,-179,801856401249)) Overlaps no draw area <(0,6875,9,4375),1,375,0,875>
WARNUNG - Ungültiger Filterausdruck: Existing = 'false' AND SpoolNumber <> ''.
WARNUNG - Ausgabedatei wurde umbenannt von TEST-1.dwg zu TEST-1 (3).dwg.
INFO    - Generierte Zeichnung: C:\Users\xxx\AppData\Roaming\Autodesk\Autodesk AutoCAD Plant 3D 2016\R20.1\deu\DefaultProject\Isometric\Final_ANSI-B\ProdIsos\Drawings\TEST-1 (3).dwg.
WARNUNG - Ausgabedatei wurde umbenannt von TEST-2.dwg zu TEST-2 (3).dwg.
INFO    - Generierte Zeichnung: C:\Users\xxx\AppData\Roaming\Autodesk\Autodesk AutoCAD Plant 3D 2016\R20.1\deu\DefaultProject\Isometric\Final_ANSI-B\ProdIsos\Drawings\TEST-2 (3).dwg.
WARNUNG - Es sind keine Tabellen für den Export konfiguriert.
WARNUNG - Es sind keine Tabellen für den Export konfiguriert.
-------------------------------------------------------------------------------