topic Re: modeling operation error: operation unsuccessful in AutoCAD Mechanical Forum

modeling operation error: operation unsuccessful

Anonymous — Thu, 20 Apr 2017 19:52:30 GMT

I have just upgrade to AutoCAD 2017 from 2014. there is one file that cannot be opened on 2017 because it will get a fatal error but will open fine on 2014. I noticed that when i open it on 2014 it says "modeling operation error: operation unsuccessful" on the command prompt after saving the file. I tried purging all unused layers and block but there are 2 blocks that are not able to be purged without getting a fatal error. I have tried recovering the file but i get a fatal error and the audit does not find any errors. Has anybody else had this problem and how do i fix it without creating a new file and pasting it everything in it.

Re: modeling operation error: operation unsuccessful

gaurav.satalkar — Wed, 26 Apr 2017 06:44:05 GMT

Hello,

Can you please attach the dwg file that has this problem in the forum?

Or, if you are not comfortable, can you send it to my email address: gaurav.satalkar@autodesk.com

The development team will try to find out the problem.

Thank You,

Gaurav

Re: modeling operation error: operation unsuccessful

Anonymous — Mon, 08 May 2017 16:36:10 GMT

Here is the file. I have erased everything in the file except the two blocks that can not be purged without having an internal error. one of them will purge but will fail once you save. Thank you for taking time into this

Re: modeling operation error: operation unsuccessful

gaurav.satalkar — Wed, 24 May 2017 11:09:00 GMT

Hello Mr Alvaro Perez,

I have checked the Drawing file that you have sent. This issue has been fixed in the Service pack for ACM 2017.

Please install the SP1 from the below link:

https://knowledge.autodesk.com/support/autocad-mechanical/downloads/caas/downloads/content/autocad-mechanical-2017-service-pack-1.html

Also install AutoCAD SP1 before installing ACM SP1:

https://knowledge.autodesk.com/support/autocad/downloads/caas/downloads/content/autocad-2017-service-pack-1.html

Hope this solves your crash problem!

Thank You,

Gaurav Satalkar

Re: modeling operation error: operation unsuccessful

Anonymous — Mon, 19 Jun 2017 15:45:20 GMT

Thank You!!! This solved the problem. Thanks for taking your time to look into this

Re: modeling operation error: operation unsuccessful

Anonymous — Thu, 17 Aug 2017 16:37:45 GMT

Hi,

Is there a way to fix the same problem for Civil 3D 2015?

Please advise.

Re: modeling operation error: operation unsuccessful

gaurav.satalkar — Tue, 22 Aug 2017 04:16:58 GMT

Hello,

This is AutoCAD Mechanical Forum. You can post your query on the Civil3D forum.

Civil3D Forum:

https://forums.autodesk.com/t5/autocad-civil-3d-forum/bd-p/66

Thank You,

Re: modeling operation error: operation unsuccessful

chantal.gagne — Wed, 24 Jul 2019 17:16:20 GMT

Hi,

I have the same problem with Autocad 2020. Did a Special pack exist for this? My Autocad is up to date.

There is the message I got when I open a drawing.

Modeling Operation Error: Error Code Number is 84026

I did an Audit and a Recover and It not solved.