topic Re: SELECTION in AutoCAD Map 3D Forum

SELECTION

Anonymous — Thu, 05 Mar 2020 09:46:08 GMT

hello

how can i select only the objects\blocks that are conected to certain polyline from an entire drawing

like the objects on the poltlive vertex

i am using autocad 3d map 2015

Re: SELECTION

Pointdump — Thu, 05 Mar 2020 09:57:34 GMT

Hasan,
Gonna need more information. Can you post your drawing and a Screenshot of what you'd like to do?
Dave

Re: SELECTION

Anonymous — Thu, 05 Mar 2020 10:09:26 GMT

i attached two files

for example i want to select a spesific polyline....(in my case all polylines) with the blocks that are connected to it.....but only the blocks on that polyline!

Re: SELECTION

Pointdump — Thu, 05 Mar 2020 10:25:27 GMT

Hasan,
Thanks for posting your drawing and screen shot.
All the blocks are on the same layer, so I don't see a way to select only the blocks on Polylines. Maybe someone here will come up with something useful.
Dave

Re: SELECTION

АлексЮстасу — Thu, 05 Mar 2020 10:26:52 GMT

Hi,

Try the FS command (from Express Tools).

Re: SELECTION

Anonymous — Thu, 05 Mar 2020 10:41:27 GMT

IT WORKS
THANKSSSSSSSSS

EXPRESS--->SELECTION TOOLS----> FAST SELECT

Re: SELECTION

Pointdump — Thu, 05 Mar 2020 10:43:35 GMT

Alexander,
Wow, Fast Select really seems to work! Thank you. I learned something new this morning.

Dave

Re: SELECTION

parkr4st — Thu, 05 Mar 2020 12:38:33 GMT

use map FDO abilities

qselect the block and mapexport to a point .sdf with block attributes to data

Qselect the lines and mapexport to a polyline .sdf line attributes to data

put the line.sdf in a map and create buffer a very tiny amount such as .01 to new .sdf

put the buffer and points into a map and mapgisoverlay intersection of points and the buffer polygons

the result is a complete data set of all the lines with the points in the buffer which being minimal is essentially 100% correct.

you can then theme that data set such as the .layer file

and Alexander, FS is very handy. thanks

dave p

Re: SELECTION

АлексЮстасу — Thu, 05 Mar 2020 19:16:00 GMT

Now I noticed that for FS there is an option FSMODE:

Command: Command: FS Use 'FSMODE to control chain selection. FSMODE = OFF

If you specify "On", all line prolongation and all intersecting objects are highlighted.