topic DRAW ORDER NOT HONORED DURING PLOT in AutoCAD Map 3D Forum

DRAW ORDER NOT HONORED DURING PLOT

dave_evans46Q8H — Thu, 16 Jan 2025 23:52:48 GMT

I added orthophotos to a Map 3D 2025.0.1 drawing via "Data Connect->Add Raster Image or Surface Connection", then XREF'd a drawing containing topography lines.

Plots via "Output->Export->PDF" and "SSM->Publish->Publish to PDF" both show just the orthophotos and no topography.

The attachment shows snips from the layout and from the PDF.

The orthophotos are about 300 MB and the topo is about 50 MB.

I've tried:

Draw Order->Bring to Front
Draw Order->Bring Above Objects
binding the XREF (bind, not insert)
hardware accel on / off
DirectX 11 / 12
2D Display Settings->Basic / Intermediate / Advanced
REA

Other info:

DRAWORDERCTL = 3

NVIDIA RTX A1000 Laptop GPU w/ driver 561.03, DCH, Direct3d level 12_1...

DedicatedSystemMemory 0
DedicatedVideoMemory 4,157,603,840
SharedSystemMemory: 17,007,407,104
PNPDeviceID VEN_10DE&DEV_25B9&SUBSYS_B1A1028&REV_A1&LUID_0\16422&FLAGS_0
DiscreteAdapter True
DoublePrecision Supported
RayTracing Supported

Re: DRAW ORDER NOT HONORED DURING PLOT

O_Eckmann — Fri, 17 Jan 2025 06:51:35 GMT

Hi,

In Map workspace palette you could try to add the layer in which you have inserted your XREF and put it above your FDO raster

Re: DRAW ORDER NOT HONORED DURING PLOT

ChicagoLooper — Fri, 17 Jan 2025 14:06:50 GMT

@dave_evans46Q8H

When you add your XREF, what layer does it land on? Can you upload an image of the Layer Properties Manager that shows the Xref's hosting layer?

Re: DRAW ORDER NOT HONORED DURING PLOT

dave_evans46Q8H — Sat, 18 Jan 2025 02:09:10 GMT

Thank you for the idea. Since I'd already "bound" the XREF, I couldn't do exactly what you suggested. But your suggestion did make me notice that the "task pane" has a "Draw Order" tab (which I'd been oblivious to until then), and I used that tab to switch the position of the "Map Base" and the raster group. That worked! Odd that the standard "select entity->(rt clk)->Draw Order->etc." approach didn't/doesn't work. Thank very much!

Re: DRAW ORDER NOT HONORED DURING PLOT

dave_evans46Q8H — Sat, 18 Jan 2025 02:10:50 GMT

Thank you for the reply. Since I'd already "bound" the XREF, I couldn't do that. But the comment by @O_Eckmann led me to a solution that works.