topic Re: WFS Connection Issue in AutoCAD Map 3D Forum

WFS Connection Issue

MichaelTaylforth5574 — Thu, 05 Apr 2018 05:03:12 GMT

Hi,

Having an issue viewing data when successfully connected to WFS. Connection is ok, however there is no data showing. See below.

I can connect successfully to service using QGIS - see screen shot below. I've just tried using the 2019 release and still no joy!!

I have found a limitation with WFS and MAP here https://knowledge.autodesk.com/support/autocad-map-3d/troubleshooting/caas/sfdcarticles/sfdcarticles/WFS-types-supported-with-Civil-3D-or-Map-3D.html

Not sure if it is relevant.

Any clues?

Cheers,

Michael.

Connected to WFS but no data

WFS layers showing correctly in QGIS

Re: WFS Connection Issue

Pointdump — Thu, 05 Apr 2018 10:29:26 GMT

Michael,

Can you post the link that's giving you difficulties?

Dave

Re: WFS Connection Issue

MichaelTaylforth5574 — Thu, 05 Apr 2018 10:45:14 GMT

Hi Dave,

no prob

https://services.slip.wa.gov.au/public/services/SLIP_Public_Services/Property_and_Planning_WFS/MapServer/WFSServer

Cheers,

Michael.

Re: WFS Connection Issue

Pointdump — Thu, 05 Apr 2018 11:01:45 GMT

Michael,

Yup, getting same as you. (I used the free Gaia instead of QGIS.)

Dave

Re: WFS Connection Issue

MichaelTaylforth5574 — Thu, 05 Apr 2018 11:15:20 GMT

Cheers Dave, at least I can be (reasonably) sure it isn't somthing I'm doing wrong at my end...

Re: WFS Connection Issue

WarrenGeissler — Thu, 05 Apr 2018 14:48:44 GMT

That's odd - the MAP Schema editor can SEE the schemas:

Re: WFS Connection Issue

Koesti — Thu, 05 Apr 2018 15:53:40 GMT

Hi @MichaelTaylforth5574 and all,

performing some test I see the same behavior.

Connection is done but no Schema is visible - happens with all versions of WFS.

Therefore I document the behavior as change request and keep you updated.

Kind regards

Re: WFS Connection Issue

serguei — Tue, 21 May 2019 21:44:10 GMT

I have tried in Map 3D 2020, the issue has not been fixed. Connection is done but no Schema is visible

https://services.slip.wa.gov.au/public/services/SLIP_Public_Services/Property_and_Planning_WFS/MapServer/WFSServer

Re: WFS Connection Issue

ChicagoLooper — Wed, 22 May 2019 00:29:47 GMT

Couldn't connect either. But I could connect using WMS.

WFS connection: Yes. (WMS: No, cannot connect)

Re: WFS Connection Issue

Koesti — Mon, 21 Oct 2019 11:20:30 GMT

Hi @MichaelTaylforth5574 ,

I like to close the loop for reading WFS coming from ArcGIS 10.6.1 is not working.

Please install Fix for Ma3D 2020 from AKN which solves the issue and reads the data from provided WFS.

Regards

Re: WFS Connection Issue

MichaelTaylforth5574 — Tue, 22 Oct 2019 00:16:38 GMT

Hi Brigitte,
Thanks, however that link in your message doesn't work.
Regards
Michael.

Re: WFS Connection Issue

luc_vanlinden — Tue, 22 Oct 2019 05:56:36 GMT

As this is issue exists already for a LOOOOOOONG time, it would be appropriate to have this fix also available for Map 2018.

Thanks

Luc Van Linden

Re: WFS Connection Issue

MichaelTaylforth5574 — Tue, 22 Oct 2019 06:09:53 GMT

Hi Brigette, pls disregard my earlier post regarding the link to the fix. All good. Thanks, Michael.

Re: WFS Connection Issue

Jam_BK — Wed, 12 Feb 2020 09:07:49 GMT

Hello Brigitte,

I'm stil having issues with many WFS Connetcions... Most of them are just not displayed when connetced. For Example:

https://geoportal.umwelt.sachsen.de/arcgis/services/natur/issand_lebensraumtypen/MapServer/WFSServer

https://geoportal.umwelt.sachsen.de/arcgis/services/natur/natura2000/MapServer/WFSServer?

Do you have any suggestions?

Re: WFS Connection Issue

Koesti — Wed, 12 Feb 2020 16:17:13 GMT

Hi @Jam_BK,

Thanks for the WFS URLs.

There are a lot of different WFS services out and from my experience, the cause is very different.

With my tests, I was able to read the data by using the option to INVERT AXIS before adding to Map.

Regards

Brigitte

Re: WFS Connection Issue

Koesti — Wed, 12 Feb 2020 16:20:31 GMT

Hi @Jam_BK ,

to be precise:

Only the second URL work for me - the first URL is not readable in any program I try.

Regards

Re: WFS Connection Issue

Jam_BK — Wed, 12 Feb 2020 16:37:49 GMT

Hello Brigitte, thanks for your quick response!

It's strange, because i don't get any reply from the server... I tried inverting the axis, but that was not the solution either. I've already applied the hotfix Map2020_WFS.zip, so right now I'm a little clueless. You have any ideas?

Re: WFS Connection Issue

Jam_BK — Wed, 12 Feb 2020 16:39:05 GMT

You're right, the first URL is outdated. Sorry my bad.

Re: WFS Connection Issue

Pointdump — Wed, 12 Feb 2020 17:06:34 GMT

Brigitte,
"INVERT AXIS"??
Where is this option, and what does it do?
Dave

Re: WFS Connection Issue

Koesti — Wed, 12 Feb 2020 17:26:14 GMT

Hi @Jam_BK ,

please find attached the dwg with the WFS connections which show the data for me - using BING maps to see that the location is fine.

Invert Axis - check before connect:

Regards