https://forums.autodesk.com/t5/autocad-map-3d-developer-forum/autolisp-error-log-in-acad-map-3d-2017/m-p/7369215#M814 <P>I am a Autolisp programer and I have some trouble with the ACAD (Map 3D) version 2017.</P><P>I used ACAD 2015 and if an error in my LISP code occurred an error log with details about the error was shown.</P><P>&nbsp;</P><P>Now in ACAD 2017 for every error the same error log is shown:</P><PRE>Cannot invoke (command) from *error* without prior call to (*push-error-using-command*). Converting (command) calls to (command-s) is recommended. </PRE><P>I use the german version:</P><PRE>Aufrufen von (command) aus *Fehler* nicht möglich, ohne vorheriges Aufrufen von (*push-error-using-command*). Konvertieren von (command)-Aufrufen in (command-s) wird empfohlen.</PRE><P>Is this problem known, and are there any solutions?</P> Mon, 11 Sep 2017 09:05:35 GMT Anonymous 2017-09-11T09:05:35Z https://forums.autodesk.com/t5/autocad-map-3d-developer-forum/autolisp-error-log-in-acad-map-3d-2017/m-p/7369215#M814 <P>I am a Autolisp programer and I have some trouble with the ACAD (Map 3D) version 2017.</P><P>I used ACAD 2015 and if an error in my LISP code occurred an error log with details about the error was shown.</P><P>&nbsp;</P><P>Now in ACAD 2017 for every error the same error log is shown:</P><PRE>Cannot invoke (command) from *error* without prior call to (*push-error-using-command*). Converting (command) calls to (command-s) is recommended. </PRE><P>I use the german version:</P><PRE>Aufrufen von (command) aus *Fehler* nicht möglich, ohne vorheriges Aufrufen von (*push-error-using-command*). Konvertieren von (command)-Aufrufen in (command-s) wird empfohlen.</PRE><P>Is this problem known, and are there any solutions?</P> Mon, 11 Sep 2017 09:05:35 GMT https://forums.autodesk.com/t5/autocad-map-3d-developer-forum/autolisp-error-log-in-acad-map-3d-2017/m-p/7369215#M814 Anonymous 2017-09-11T09:05:35Z