topic Re: PDF size and output in AutoCAD for Mac Forum

PDF size and output

jfPMYR5 — Fri, 20 Oct 2023 11:57:54 GMT

PDF file after saving has 8.1MB which is nothing unusual, but I got feedback from clients that file is not workable (long time to load, blurry, issues with zoom). I manage to shrink DWG file to 3.9MB with all recommended steps (CONVERT, XREF, OVERKILL,...) I wonder if anyone has same experience , is there any print setup which can help.

Re: PDF size and output

maxim_k — Fri, 20 Oct 2023 12:11:30 GMT

Hi @jfPMYR5 ,

What autoCAD for Mac version do you use?

What printer do you use for PDF output?

Do you have raster image or PDF underlay attached to DWG file?

Can you share your PDF file here?

Re: PDF size and output

jfPMYR5 — Fri, 20 Oct 2023 12:29:21 GMT

Hi Maxim,

I Use AutoCAD 2023 version.

For this case I used AutoCAD PDF (Smallest file).pc3, before I usually printed on DWG to PDF.ac3, but both created PDF have similar issue.

The drawing has no Xref or underlay.

Re: PDF size and output

maxim_k — Fri, 20 Oct 2023 13:22:33 GMT

@jfPMYR5 ,

There are billions of lines in your drawing, which is why the PDF size is so large.

I don't think there is a way to compact such PDF.

Re: PDF size and output

jfPMYR5 — Fri, 20 Oct 2023 13:29:47 GMT

Hi Maxim,

I thought this before, that drawing is complicated with lot of objects and lines and it will be issue with PDF. Anyway thanks for your help.

Re: PDF size and output

pendean — Fri, 20 Oct 2023 16:12:12 GMT

@jfPMYR5 Late to the party... May I ask if these many smaller elements were blocks at one time and have not been exploded? Do you have a pre-exploded version you can share with your client? It would behave much better than what you shared here.

Re: PDF size and output

jfPMYR5 — Mon, 23 Oct 2023 09:52:38 GMT

Hi ,
thanks for a tip. I will review this. Drawing consist with lots of blocks, which been edited many times.
I will review this.

Re: PDF size and output

pendean — Mon, 23 Oct 2023 14:18:57 GMT

@jfPMYR5 wrote:
Hi ,
thanks for a tip. I will review this. Drawing consist with lots of blocks, which been edited many times.
I will review this.

I meant the full rows being ingle bocks, not just each individual rack for example: on my above-average PC any PDF viewer or editor I use to open your PDF I can literally watch each individual rack appear in each row as your full floor plan appears. Then it repeats every single time I zoom in or out in the PDF.

Quite time-consuming for a PDF sheet size that you created honestly: for example, does your PDF really and truly need to contain this level of detail?

In our office we emphasize "understanding your target audience" and I suspect your complaining recipient may not need that level of detail on a 33x46 PDF sheet. It's worth asking them if they do or no, the level of detail you created belong on detail sheets, not an overall plan sheet. FREEZE those layers before creating that PDF again, they are very unnecessary I suspect.

HTH

Re: PDF size and output

jfPMYR5 — Tue, 24 Oct 2023 12:22:42 GMT

Thanks for highlighting this details. These are things which I need to be consider and focused in future.