topic Re: Can't Change Linetype in AutoCAD LT Forum

Can't Change Linetype

Anonymous — Thu, 16 Jan 2014 19:12:09 GMT

I cannot change the linetype of the line I made. It is a file created in AutoCAD 2007 and opened in AutoCAD 2014, but I don't think that that has anything to do with it since I also could not change the linetype in AutoCAD 2007.

When I simply create a new file in AutoCAD 2014, I can create a line and change the linetype very easily. I am a fairly inexperienced user with AutoCAD, and so, the solution may be very simple.

Re: Can't Change Linetype

drjohn — Thu, 16 Jan 2014 19:44:20 GMT

Quick guess on limited input .... in layer manager click on the linetype that you want to change ... a dialog will come up with a selection of lines that are already defined in the drawing. If you don't see the one you want, click on the LOAD selection ... select the desired linetype ... click OK ... back to the selection dialog ... AGAIN select the linetype you want and click OK. Should show that linetype as current on that layer now.

Also, notice what .lin file is being used (in the load linetype dialog at the top field).

HTH

Regards,

Re: Can't Change Linetype

sthompson1021 — Thu, 16 Jan 2014 19:56:04 GMT

Another thing to check is to make sure the layer you created the line on is not locked. You can draw a line on a locked layer but once it's made, you can't edit it without unlocking the layer.

Re: Can't Change Linetype

Anonymous — Thu, 16 Jan 2014 21:14:54 GMT

I have attached the file I am talking about if that helps.

Re: Can't Change Linetype

sthompson1021 — Thu, 16 Jan 2014 21:25:25 GMT

What line are you trying to change? What linetype do you want?

Re: Can't Change Linetype

Anonymous — Thu, 16 Jan 2014 21:27:56 GMT

Any line and any line type. I just want the ability to change a line. I can change it in the toolbar, but it won't affect the drawing.

Re: Can't Change Linetype

sthompson1021 — Thu, 16 Jan 2014 21:45:14 GMT

You need to change your linetype scale to see the differant linetypes. Type LTSCALE at the command line and change it to 1000. For this dwg I would use decimal for units and change the insertion scale to feet.

Re: Can't Change Linetype

Anonymous — Thu, 16 Jan 2014 21:59:13 GMT

Thank you. I knew it was something simple. Like I said, I don't use this program very often. Thanks again!

Re: Can't Change Linetype

Anonymous — Mon, 25 Aug 2014 20:39:23 GMT

I too am unable to change linetypes even with tytping LTSCALE and setting it to 1000.

Re: Can't Change Linetype

sthompson1021 — Mon, 25 Aug 2014 20:47:33 GMT

Can you post the .dwg? Without seeing your settings it is hard to guess what what the problem might be.

Re: Can't Change Linetype

Anonymous — Mon, 25 Aug 2014 20:58:36 GMT

Re: Can't Change Linetype

Anonymous — Mon, 25 Aug 2014 21:14:56 GMT

I appeared to have posted it correctly the first time but I didn't see it come through. Did you get it?

Re: Can't Change Linetype

sthompson1021 — Mon, 25 Aug 2014 21:23:45 GMT

I looked at the drawing and by selecting everything and changing the linetype scale in the properties pallet to .0001 the line's showed up. Can I ask why this is drawn in a layout with no viewport? That is why the LTSCALE needs to be set so small.

Re: Can't Change Linetype

pendean — Mon, 25 Aug 2014 21:30:27 GMT

Your LTSCALE is set to a 1000. I changed it to one. It's still 1 after I close and open the file. What AutoCAD/LT version are you using?
You draw in paperspace (not in a viewport) and not at a 1:1 scale: What size is the 'widget' supposed to be?
LTSCALE probably need to be a lot less than 1 for you to see anything (1/10 starts to show your linetypes). This may simply be a case of a badly drawn object in the wrong space.

Re: Can't Change Linetype

Anonymous — Mon, 26 Oct 2015 01:06:29 GMT

Hi,

Is it possible to look at my drawing as well?

I have tried numerous line type scales and cannot see a change.

Regards.

Re: Can't Change Linetype

pendean — Mon, 26 Oct 2015 12:42:15 GMT

PROPERTIES command will fix your settings

Re: Can't Change Linetype

Anonymous — Mon, 26 Oct 2015 21:17:51 GMT

Thanks.

The linetype scale had been changed due to reading the previous posts in this thread. Changing this back to 1 (as is default) has no affect on the drawing. I am using AutoCad LT 2014. Not sure if that makes a difference.

Regards.

Re: Can't Change Linetype

pendean — Tue, 27 Oct 2015 12:38:56 GMT

See attached: fix as noted above, plus change LTSCALE setting.

Re: Can't Change Linetype scale as well can you check my file

Anonymous — Thu, 31 May 2018 11:39:48 GMT

Hi,

I'm having some issues as well with changing the linetype scale.

I have tried lts scale and changing the individual linetype scale in properties but nothing has worked.

Can you look at my file I attached to see what can be done?

thnx

Re: Can't Change Linetype scale as well can you check my file

gotphish001 — Fri, 01 Jun 2018 12:53:44 GMT

I don't know how you want it to show in your drawing but the ltscale works fine. You just need to try different values. When I test to try to get the results I want, I usually try values like this: 1, 10, 100, 1000, .01, .001, .0001 when I find a value where it makes a visual change then I tweak it to what I want. If ltscale 100 makes some linetypes show up then I'll try 80 or 120 and tweak from there up or down. I put 50 in from your and I think I ended up in the 30 for a good result, but I don't know how you want it to look. Sometimes the linetypes will go away after you have it set right. You can do a command REGENALL to have it refresh correctly again.