https://forums.autodesk.com/t5/autocad-lt-forum/utilising-mirror-option/m-p/12347617#M4542 <P>When using mirror to covert a drawing in plan view "right handed" to plan view "left handed" How can i change the dimensions to read from left to right without highlighting the dimension line?</P><P>Note: I've highlighted in "blue" and highlighted in "green" and even just selected the dimension numbers but in all cases AutoCAD selects both the dimension numbers and the dimension line. ( I assume it because the line was drawn along with the dimension but is the a way i can just select the numbers select mirror and change to read correctly.</P> Wed, 01 Nov 2023 20:49:23 GMT Woodward34 2023-11-01T20:49:23Z https://forums.autodesk.com/t5/autocad-lt-forum/utilising-mirror-option/m-p/12347617#M4542 <P>When using mirror to covert a drawing in plan view "right handed" to plan view "left handed" How can i change the dimensions to read from left to right without highlighting the dimension line?</P><P>Note: I've highlighted in "blue" and highlighted in "green" and even just selected the dimension numbers but in all cases AutoCAD selects both the dimension numbers and the dimension line. ( I assume it because the line was drawn along with the dimension but is the a way i can just select the numbers select mirror and change to read correctly.</P> Wed, 01 Nov 2023 20:49:23 GMT https://forums.autodesk.com/t5/autocad-lt-forum/utilising-mirror-option/m-p/12347617#M4542 Woodward34 2023-11-01T20:49:23Z https://forums.autodesk.com/t5/autocad-lt-forum/utilising-mirror-option/m-p/12347669#M4543 Did you perhaps not set MIRRTEXT command to what you want it to be (and the default settings) before mirroring? Read this from HELP<BR /><A href="https://help.autodesk.com/view/ACDLT/2023/ENU/index.html?guid=GUID-D55D2D18-B26E-4525-B5E4-03A2A07FB5F6#:~:text=Controls%20how%20MIRROR%20reflects%20text" target="_blank">https://help.autodesk.com/view/ACDLT/2023/ENU/index.html?guid=GUID-D55D2D18-B26E-4525-B5E4-03A2A07FB5F6#:~:text=Controls%20how%20MIRROR%20reflects%20text</A>.<BR /><BR />NOTE: dimensions are single entities in AutoCAD, text is not separate, but you can edit each one individually with DIMTEDIT command. But that is tedious if you have more than a handful to fix.<BR /> Wed, 01 Nov 2023 21:20:08 GMT https://forums.autodesk.com/t5/autocad-lt-forum/utilising-mirror-option/m-p/12347669#M4543 pendean 2023-11-01T21:20:08Z