topic Re: Dimension text upside down in AutoCAD LT Forum

Dimension text upside down

bidhin_patel — Thu, 01 Aug 2024 19:07:38 GMT

My UCS also moves while I am dimensioning. I don't remember if it was happening before but I don't want it.

Please Help.

Thank You

Re: Dimension text upside down

pendean — Thu, 01 Aug 2024 19:11:29 GMT

Set the commands UCS and PLAN to WORLD first, then find out what is truly going on in your file.

Re: Dimension text upside down

bidhin_patel — Thu, 01 Aug 2024 19:17:36 GMT

Did still the same

Re: Dimension text upside down

pendean — Thu, 01 Aug 2024 19:27:13 GMT

Restart your PC @bidhin_patel

Open an all new blank DWG file, draw and dimension in there: is the issue still present? I suspect not, but you'll have to confirm.

HTH

Re: Dimension text upside down

bidhin_patel — Thu, 01 Aug 2024 19:31:06 GMT

It is happening because when i select points, new axis guides dimension text where to display @pendean

Re: Dimension text upside down

h_s_walker — Fri, 02 Aug 2024 08:22:41 GMT

Your UCS is still upside down. The Y in your first picture should be above the line not below.

Re: Dimension text upside down

pendean — Fri, 02 Aug 2024 14:42:12 GMT

@bidhin_patel wrote:
...It is happening because when i select points, new axis guides dimension text where to display @pendean

Once your UCS looks like this (see below) in a new file (or your current one), your issue will go away, see tips I already provided to get there

HTH

Re: Dimension text upside down

bidhin_patel — Fri, 02 Aug 2024 14:45:10 GMT

It is solved i by mstake clicked on DUCS.

Re: Dimension text upside down

pendean — Fri, 02 Aug 2024 16:19:57 GMT

@bidhin_patel wrote:
It is solved i by mstake clicked on DUCS.

Which year version (and actual AutoCAD version) are you using please? ABOUT command in the program will confirm your software. You appear to be in the wrong forum at least.