topic Re: What's wrong with line command in AutoCAD Forum

What's wrong with line command

Anonymous — Sat, 07 Nov 2020 10:25:33 GMT

When I draw lines in new drawings everything works normally.

but in the file that I have attached the line command is working wired, when I draw line and watch in 3d SWisometric looks like presspull command is working simultaneously, I can't draw a normal line. This is same with circle, polyline and more. Not sure what to do.

I have attached the file please open and draw something and reply if the problem is with you also.

Re: What's wrong with line command

imadHabash — Sat, 07 Nov 2020 10:38:59 GMT

Hi,

you need to change your THICKNESS value = 0 . also you can from Properties dialog change this value for existing line elements . select all those lines then type Ctrl+1 and change Thickness value to Zero . 🙂

Command: THICKNESS
Enter new value for THICKNESS <0'-9 7/64">: 0

Re: What's wrong with line command

imadHabash — Sat, 07 Nov 2020 10:47:12 GMT

click on below image to see how it's solved .

Re: What's wrong with line command

Anonymous — Sat, 07 Nov 2020 14:25:51 GMT

@imadHabash

Thank you so much for the solution.