https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880636#M91284 <P>That's just the tricky part. It sometimes is so difficult to find a spot where it lines up. Sometimes the two pieces have a different angle too.</P> Thu, 19 Nov 2020 11:54:52 GMT Rikkes 2020-11-19T11:54:52Z https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880138#M91280 <P>Hi!&nbsp;<BR />Is it possible to align weird shaped solids? See the example in attachment.&nbsp;</P> Thu, 19 Nov 2020 07:22:37 GMT https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880138#M91280 Rikkes 2020-11-19T07:22:37Z https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880489#M91281 <P>such as MOVE one to match edges with the other?</P> Thu, 19 Nov 2020 10:39:47 GMT https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880489#M91281 parkr4st 2020-11-19T10:39:47Z https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880504#M91282 <P>Yes, how did you do it?</P> Thu, 19 Nov 2020 10:49:05 GMT https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880504#M91282 Rikkes 2020-11-19T10:49:05Z https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880601#M91283 <P>command&nbsp; MOVE</P> <P>select a point on the lower edge of the moved part and snap it to the other part when it lines up.&nbsp;</P> Thu, 19 Nov 2020 11:36:45 GMT https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880601#M91283 parkr4st 2020-11-19T11:36:45Z https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880636#M91284 <P>That's just the tricky part. It sometimes is so difficult to find a spot where it lines up. Sometimes the two pieces have a different angle too.</P> Thu, 19 Nov 2020 11:54:52 GMT https://forums.autodesk.com/t5/autocad-forum/align-weird-shaped-solids/m-p/9880636#M91284 Rikkes 2020-11-19T11:54:52Z