topic Re: Aligned lines showing as moved when zoomed in much in AutoCAD Forum

Aligned lines showing as moved when zoomed in much

hussicharmssf — Thu, 03 Dec 2020 17:35:49 GMT

Hi. When i zoom in very closer the lines which seem to be on same level appears to be moved a little bit. can anybody provide a solution to this issue. i have attached the drawing here and marked the places with issue in a revcloud. u can zoom those areas and see the problem.

Re: Aligned lines showing as moved when zoomed in much

pendean — Thu, 03 Dec 2020 17:52:34 GMT

What revclouds?

Which lines?

Re: Aligned lines showing as moved when zoomed in much

Patchy — Thu, 03 Dec 2020 18:02:57 GMT

You meant the red line on top of the gray line,it's not ortho so you see it moves when you zoom in really close.

Re: Aligned lines showing as moved when zoomed in much

JBerns — Thu, 03 Dec 2020 17:56:58 GMT

@hussicharmssf,

Could you create a Screencast video that demonstrates the behavior you describe?

Autodesk Screencast

AutoCAD version? Updates? Video card? Graphics driver version? Screen resolution?

Can you reproduce the problem in other drawings? Reproduce problem on other computers?

My first guess would be that it is a behavior of your graphics driver.

We look forward to seeing the Screencast.

Regards,

Jerry

Re: Aligned lines showing as moved when zoomed in much

hussicharmssf — Fri, 04 Dec 2020 03:53:48 GMT

i have put one revcloud at top left of carparking and another one at door..zoom very very in those areas and u can see the lines are not aligned on same line..they seem little bit moved from one other. even if i try to grab the end pointt and align with other end point, again the lines are not aligned...

Re: Aligned lines showing as moved when zoomed in much

hussicharmssf — Fri, 04 Dec 2020 04:20:13 GMT

hai jberns. i have given the link to the screencast.kindly see it. am using autocad 2017.nvidia geforce 4gb. u can see in the video when i zoom very close the lines are not aligned

Re: Aligned lines showing as moved when zoomed in much

hussicharmssf — Fri, 04 Dec 2020 05:17:50 GMT

see the screencast here

Re: Aligned lines showing as moved when zoomed in much

vinodkl — Fri, 04 Dec 2020 06:55:31 GMT

Hi @hussicharmssf

There is no need to use the command "MOVE" you just need to select the grip and snap to the endpoint. When you use the command "MOVE" you are moving the whole rectangle created on layer "hatch" and when it's moved and snapped to one end its moves away from the other end.

Also, I noticed that the "PLAN" is slightly rotated. Use the command "PLAN" and select "Current UCS" to correct it.

Use "ortho" (F8 key) when drawing lines that are horizontal and vertical and use object snap (F3 key) properly and snap the lines to the correct endpoint so that this issue doesn't arise 🙂

Re: Aligned lines showing as moved when zoomed in much

imadHabash — Fri, 04 Dec 2020 07:01:51 GMT

Hi,

This is a drafting issue that can be fixed simply :

Move the two car parking away .
make sure now that you have a clean space ( Ortho Lines) and dimensions for the space ( Car Parking ) .
check now your two car parking lines and dimensions .

In this way you will not see again those shifted lines .

Re: Aligned lines showing as moved when zoomed in much

hussicharmssf — Fri, 04 Dec 2020 09:28:37 GMT

how can i see this details?

Re: Aligned lines showing as moved when zoomed in much

vinodkl — Fri, 04 Dec 2020 09:29:39 GMT

@hussicharmssf select the object and the type in the command "LIST" to get it.