topic Re: Creating a slanted corner on a 3d object in AutoCAD Forum

Creating a slanted corner on a 3d object

Anonymous — Mon, 05 Jul 2021 18:44:46 GMT

I want to create a slanted face on this corner of this solid object. The XYZ components all have different values.
I've tried using slicing, but the slice never comes out in the angle I need.
I tried to chamfer the edges but that doesn't work either.
I've also tried to taper the edge, but that doesn't help either.
I've tried googling, however I only found a similar one using AUTOCAD Fusion 360 and the commands are different.

Re: Creating a slanted corner on a 3d object

leeminardi — Mon, 05 Jul 2021 19:40:40 GMT

Give the slice command and then enter 3 and with object snap set to end points pick the 3 vertices that define the slice plane. For the 4th point click a corner of the object on the side you want to keep.

Re: Creating a slanted corner on a 3d object

changmarin — Mon, 05 Jul 2021 19:47:36 GMT

You could use IMPRINT on a solid. Hold Control key to pick the vertex.

Hope you find this approach helpful.

Regards-

Re: Creating a slanted corner on a 3d object

Anonymous — Mon, 05 Jul 2021 20:16:23 GMT

Ugh, ohmygod. It finally worked. Thank you so much!