topic Re: 180*** series errors occurring when trying to export drawing to .stl file in AutoCAD Forum

180*** series errors occurring when trying to export drawing to .stl file

opesey — Thu, 21 Nov 2024 18:16:06 GMT

Hello,

Appreciate the read in advance. I am using AutoCAD 2025 and designing a bash bar for an automobile. The part has many extruded cylinders that are sliced to create clean "bends" and edges. I have made 3 iterations to the print and during the addition of the last few edits, I am not getting an error during the export process. These range from different error codes, but all have the 180 (18012,15,33 and a few more) designation.

I have tried to revert back to old files and print them, they are fine. Even taking away the new parts on this drawing, it still throws the same error code. I have redrawn the part, accounting for unsolid surfaces and cleaned it up, still it is showing the same errors.

Any help would be appreciated. Thanks in advance.

Re: 180*** series errors occurring when trying to export drawing to .stl file

pendean — Thu, 21 Nov 2024 21:07:04 GMT

is this a problem you have with all of your files and 3DSolids, or just this one?

That's a rare one from hat I can find https://forums.autodesk.com/t5/autocad-forum/i-cant-convert-dwg-to-stl/td-p/11892797

Re: 180*** series errors occurring when trying to export drawing to .stl file

opesey — Thu, 21 Nov 2024 22:14:30 GMT

Just an issue with this specific part. It only cropped up about 3/4 of the way through designing it and no amount of re working it has been beneficial yet.

Re: 180*** series errors occurring when trying to export drawing to .stl file

pendean — Thu, 21 Nov 2024 22:19:44 GMT

Can you share your DWG file here? Point to the specific part inside that please.

Re: 180*** series errors occurring when trying to export drawing to .stl file

opesey — Fri, 22 Nov 2024 02:25:22 GMT

Sending over the original part.

Re: 180*** series errors occurring when trying to export drawing to .stl file

Valentin_CAD — Fri, 22 Nov 2024 10:47:37 GMT

@opesey ,

Must clean up duplicating and overlapping objects.

Re: 180*** series errors occurring when trying to export drawing to .stl file

opesey — Fri, 22 Nov 2024 15:06:09 GMT

got it working, thank you all. your suggestions worked smoothly.