topic Re: Can you help me verify if my elevation drawings are correct? in AutoCAD Forum

Can you help me verify if my elevation drawings are correct?

za43EVCNY — Fri, 18 Feb 2022 00:10:07 GMT

Hello everyone, I just started learning AutoCAD and I've been trying to create an elevation of a floor plan. I was successfully "I think" created the elevation of one side. However, this elevation has an angle and I am not sure if I have done it right. Here is the the floor plan and the elevation I created. I've mirrored the same exact length and the angle of the line. But for some reason it seems it is wrong. It's not natural to look at. What I'm missing here? Is it because it's a 2D? Thanks!!!

Re: Can you help me verify if my elevation drawings are correct?

ennujozlagam — Fri, 18 Feb 2022 02:07:00 GMT

your elevation should look like this and are not inclined and don't follow your plan angle,

Re: Can you help me verify if my elevation drawings are correct?

Patchy — Fri, 18 Feb 2022 02:16:02 GMT

About 15" path to get in the shower is very uncomfortable, and the window behind the shower?

Re: Can you help me verify if my elevation drawings are correct?

imadHabash — Fri, 18 Feb 2022 06:47:51 GMT

Hi,

>> this elevation has an angle and I am not sure if I have done it right.

No .. it's not right . you're draw a 2d elevation .. you're sloped elevation side must in a horizontal way not as perspective .

Re: Can you help me verify if my elevation drawings are correct?

za43EVCNY — Fri, 18 Feb 2022 20:54:33 GMT

Thank you for your response. So any border lines that are not at 0 angle should be ignored when creating elevation in a 2D? And the only way to create the elevation with the exact angles should be used only used when creating elevation in 3D right? Thanks!

Re: Can you help me verify if my elevation drawings are correct?

za43EVCNY — Fri, 18 Feb 2022 21:02:23 GMT

The dimensions are in meters so the shower is about 70x70 cm. The window should be placed in the middle, you are right about that. Thanks.