topic Extend command doesn't work (AutoCAD 2019) in AutoCAD Forum

Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Mon, 04 Apr 2022 06:49:09 GMT

Hi!

I try to using the Extend command, extend the four lower edges using Stretch and Merge options by 15 units but I can't select the four lower edges. How can I solve that?

Re: Extend command doesn't work (AutoCAD 2019)

tramber — Mon, 04 Apr 2022 06:56:46 GMT

Looks like you are dealing with a solid.

The bottom face (a is guess) has to be offset with that kind of command :

From the solid edition tools panel

Re: Extend command doesn't work (AutoCAD 2019)

imadHabash — Mon, 04 Apr 2022 07:11:46 GMT

Hi,

As noticed in your attached image the command line waiting you for selecting ( Select surface edges to extend: ) .. now you can start select more than one edge .

Re: Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Mon, 04 Apr 2022 07:16:11 GMT

Unfortunately it doesn't work!

Re: Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Mon, 04 Apr 2022 07:18:57 GMT

I can't select the lower edges!

Re: Extend command doesn't work (AutoCAD 2019)

imadHabash — Mon, 04 Apr 2022 07:24:25 GMT

Is that what you're asking for ... Click on below image .

Re: Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Mon, 04 Apr 2022 07:31:41 GMT

Doesn't work

Re: Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Mon, 04 Apr 2022 07:37:24 GMT

I send the file Övning 14 Inte klar.dwg

Re: Extend command doesn't work (AutoCAD 2019)

imadHabash — Mon, 04 Apr 2022 07:50:15 GMT

You may need to select a surface not edges .. >> Click <<

Re: Extend command doesn't work (AutoCAD 2019)

tramber — Mon, 04 Apr 2022 08:11:46 GMT

Busy today !

My friends gonna tell you what to do between solids and surfaces, there are ways 😉

Re: Extend command doesn't work (AutoCAD 2019)

j.palmeL29YX — Mon, 04 Apr 2022 09:04:32 GMT

The polyline(s) and the surface(s) should be on different layers. Don't put all objects on the same layer.

Now you can disable (or freeze) the the polyline's layer before running the surfextend command.

Re: Extend command doesn't work (AutoCAD 2019)

j.palmeL29YX — Mon, 04 Apr 2022 09:25:35 GMT

... or the Selection Cycling can be used as shown in >>this video>>.

(SELECTIONCYCLING = ON, CULLINGOBJ must be OFF)

Re: Extend command doesn't work (AutoCAD 2019)

peter.samiotakis — Tue, 05 Apr 2022 07:13:29 GMT

Thanks 🙏
It works!