topic Re: [Sweep] Error Code Number is 115028 in AutoCAD Forum

[Sweep] Error Code Number is 115028

edwardlim8 — Fri, 15 Apr 2022 01:51:08 GMT

I have to sweep by one circle ( radius: 9) to make 3D solid along my 3DPolyline path. However, the sweep is not work due to turning point of my 3DPolyline too big.

Is it any other ways to draw 3D solid along 3DPolyline path?

The following is my drawing attachment.

Re: [Sweep] Error Code Number is 115028

j.bongers — Fri, 15 Apr 2022 06:58:24 GMT

The circle diameter 9 is not square in line with the beginning of your path.

That's why it doesn't work.

Jos.

Re: [Sweep] Error Code Number is 115028

j.palmeL29YX — Fri, 15 Apr 2022 12:58:17 GMT

Using a circle with a radius 5 you will get at the end of the path this result:

What do you expect if the radius is 9 (as yours)?

AutoCAD can not build such overlapping volume at once.

Re: [Sweep] Error Code Number is 115028

j.bongers — Fri, 15 Apr 2022 12:50:13 GMT

I am sorry,

Tried to help but did not inspect the solid completely.

Sure that is the problem.

Jos.

Re: [Sweep] Error Code Number is 115028

j.palmeL29YX — Fri, 15 Apr 2022 13:01:23 GMT

With some additional effort you can get this (attached file).

Does that meet your goal?
(If yes I can show you a video ...)

Re: [Sweep] Error Code Number is 115028

j.bongers — Fri, 15 Apr 2022 14:34:02 GMT

I have got the same result.

Think that EdwardLIM has to react.

Jos.

Re: [Sweep] Error Code Number is 115028

parkr4st — Sat, 16 Apr 2022 09:31:57 GMT

is it any other ways to draw 3D solid along 3DPolyline path?

yes

break the line at the intersections. center a sphere r =9 on the intersections. sweep the circle along the lines, and union the solids into one.

see attched .dwg

Re: [Sweep] Error Code Number is 115028

schulz8NPAP — Sun, 17 Apr 2022 14:46:48 GMT

Additional

Regards

Jochen

www.black-cad.de

Re: [Sweep] Error Code Number is 115028

edwardlim8 — Wed, 20 Apr 2022 01:24:09 GMT

Would you please teach me how to do it ? Thanks !

Re: [Sweep] Error Code Number is 115028

edwardlim8 — Wed, 20 Apr 2022 01:35:51 GMT

Thanks for your help !

Re: [Sweep] Error Code Number is 115028

edwardlim8 — Wed, 20 Apr 2022 01:47:05 GMT

That's my expect result ! May I know when I need to split the line ? Is it base on turning angle ?

Re: [Sweep] Error Code Number is 115028

schulz8NPAP — Wed, 20 Apr 2022 10:26:33 GMT

Hello,

as you can see from the source code this is an idea coming from 2010.

There is no error handling included - especially for considering self-intersections.

But - is this really an error if you imagine to make the LINE 3 longer (or - if you make the diameter smaller) ?

Regards

Jochen

PS.: Please consider that the diameter of the tube has to be smaller than the radius of bending.