topic Re: Angle and one side of triangle in AutoCAD Forum

How to draw angled lines ?

vladimir.kitanov26 — Mon, 13 Jun 2022 23:17:33 GMT

How to draw this?

Re: Angle and one side of triangle

Washingtonn — Mon, 13 Jun 2022 22:46:02 GMT

Re: How to draw angled lines ?

imadHabash — Mon, 13 Jun 2022 23:40:52 GMT

Hi and Welcome to AutoCAD Forum,

You can draw those angle lines by many ways ..

CHAMFER command . >> Click <<
Draw lines by a specific length .. Enter the at symbol (@) and the length, followed by the left angle bracket (<) and the angle, for example @15<45 .
Draw lines by a specific angle .. Enter the left angle bracket (<) and the angle, for example <45, and move the cursor to indicate the direction.

Click on below image ...

Re: How to draw angled lines ?

Kent1Cooper — Tue, 14 Jun 2022 01:24:03 GMT

The simplest way to draw the circled Line, if from lower left to upper right, is by giving it the start point and then:

@10,10

i.e. a relative X,Y displacement [with running Osnap turned off, of course]. Then you don't need to know the length [which will be irrational, involving the square root of 2], as you would to get it right with @distance<45. If you do it that way with an approximate distance, you'll need to then Fillet it with the upper horizontal Line to get the right length.