topic Re: attribute inversion problem in AutoCAD Forum

attribute inversion problem

nosurvive — Tue, 02 Aug 2022 03:36:34 GMT

hi, I am having a problem as shown in the attachment.

The two cases come from the same block definition, telecom_manhole. The attributes appear upside down in case 1 using the BEDIT and ATTSYNC method, while the case 2 using inserting block via definition has no problem. I don't why and how to fix it.

Can anybody help me with this problem ? thanks in advance 🙂

Betreff: attribute inversion problem

cadffm — Tue, 02 Aug 2022 06:20:02 GMT

Rotate the block reference by 180, or change the rotation in your property palette [CTRL+1] to 0.

Re: attribute inversion problem

imadHabash — Tue, 02 Aug 2022 07:17:09 GMT

Hi,

>> the BEDIT and ATTSYNC method

I doubt that BEDIT will do that because your origin block is correct .. all what you need now is to modify your upsidedown block from Propertied palette ( Ctrl+1 ) .

Re: attribute inversion problem

nosurvive — Wed, 03 Aug 2022 09:18:33 GMT

I see, that was because i rotated the block at a angle of 180 during the insertion. Thanks a lot )