topic Re: Text not updating through paper space in AutoCAD Forum

Text not updating through paper space

mitch53957 — Wed, 15 Jan 2025 23:24:13 GMT

Hi there

I have a problem with my text. for some reason the Franklin Gothic Med that i use has unlinked from my text in paper space. i have checked text style manager and it is correct in there and i can manually change it and looks correct as you can see below, id like to link this to save me changing it on every sheet and in every project, please see the pictures below.

as you can see from the photos i can manually change the text so its loaded i just want to know how to update them to relink automatically as i have many sheets and many projects

Any help is greatly appreciated !!!!

Andrew

Re: Text not updating through paper space

paullimapa — Wed, 15 Jan 2025 23:40:17 GMT

Any difference if you turn Fast shaded mode off using the GraphicsConfig command?

Re: Text not updating through paper space

mitch53957 — Thu, 16 Jan 2025 00:46:44 GMT

No difference , I'm assuming below is what you are referring to

it is also worth noting the next isn't displaying in plan also

Re: Text not updating through paper space

paullimapa — Thu, 16 Jan 2025 01:26:52 GMT

Can you enter ABOUT command, do a screenshot and share that here as well?

Re: Text not updating through paper space

pendean — Thu, 16 Jan 2025 14:07:55 GMT

Looks like someone (or you) edited or copy/pasted your MTEXT from another source, nothing more

Re: Text not updating through paper space

mitch53957 — Thu, 16 Jan 2025 22:05:34 GMT

Re: Text not updating through paper space

mitch53957 — Thu, 16 Jan 2025 22:06:28 GMT

that may of been the case .. unsure , although is there a way to group fix it without going in and editing each text is the answer I'm searching for

Re: Text not updating through paper space

paullimapa — Thu, 16 Jan 2025 22:26:31 GMT

You may want to try updating to 2025.1.1 to see if that makes a difference

Re: Text not updating through paper space

cadffm — Thu, 16 Jan 2025 23:44:20 GMT

Hi,

would you please share this file?

if not:

1. You didn't confirmed that the style is TB3, select the mtext and check the style, CTRL+1

2. What you do in your picture is to overwrite mtext properties with internal mtext formats, that's not what you want, trust me.

Re: Text not updating through paper space

paullimapa — Thu, 16 Jan 2025 23:47:24 GMT

You can also try setting Gfxdx12 to 0 then close and restart AutoCAD LT and see if opening that same dwg still has that problem